So langsam nähert sich das Design auch einer Matte, mit der ich auch gut leben könnte 😊👍Das letzte Ergebnis finde ich schon eine wirklich richtig gute Alternative.
Blood Bowl Team Manager Legendary Edition Druck
-
- offen
-
Tantis -
16. März 2024 um 15:46
-
-
Ich hab ja jetzt schon lange nicht mehr gespielt / noch nicht mit der Erweiterung…aber: reichen nicht 2 Starspieler Felder (also jeweils einer pro Seite)? Das hatte mich schon bei der anderen Matte gewundert..
Kann mich aber auch irren…
-
Kannst du sie bitte noch ein bisschen größer machen?!
Entweder den großen Ball im Hintergrund leicht drehen (so dass es mit den Stacheln nicht ganz so symmetrisch aussieht) und/oder die kleinen Bälle von den Ablagen entfernen.
Die Ausrichtung ist natürlich nicht korrekt wenn man davon ausgeht, dass die Teams sich Endzone zu Endzone gegenüberstehen, aber in diesem Fall nenne ich das mal künstlerische Freiheit unter Einhaltung einer Symmetrie die bei der ursprünglichen Matte nicht gegeben ist
Könntest du die Fläche im Hintergrund mal um 90 Grad drehen (und dann natürlich weniger Yards zeigen, damit es nicht so gestaucht wirkt), damit man einen Vergleich hat?
-
Ich hab ja jetzt schon lange nicht mehr gespielt / noch nicht mit der Erweiterung…aber: reichen nicht 2 Starspieler Felder (also jeweils einer pro Seite)? Das hatte mich schon bei der anderen Matte gewundert..
Kann mich aber auch irren…
Jede Fraktion hat ihre eigenen Starspieler Stapel, es können also auch bis zu 5 benötigt werden.
-
Ich hab ja jetzt schon lange nicht mehr gespielt / noch nicht mit der Erweiterung…aber: reichen nicht 2 Starspieler Felder (also jeweils einer pro Seite)? Das hatte mich schon bei der anderen Matte gewundert..
Kann mich aber auch irren…
Jede Fraktion hat ihre eigenen Starspieler Stapel, es können also auch bis zu 5 benötigt werden.
Ach klar - Sorry - Kommt daher, dass ich zu 95% das Spiel zu zweit gespielt habe 😂😂😂
-
Entweder den großen Ball im Hintergrund leicht drehen (so dass es mit den Stacheln nicht ganz so symmetrisch aussieht) und/oder die kleinen Bälle von den Ablagen entfernen.
Könntest du die Fläche im Hintergrund mal um 90 Grad drehen (und dann natürlich weniger Yards zeigen, damit es nicht so gestaucht wirkt), damit man einen Vergleich hat?
Die Drehung würde bewirken, dass die Endzonen sich im Verhältnis zur Spielfeldbreite zu dicht gegenüberliegen würden, das würde einfach nur falsch aussehen.
-
Entweder den großen Ball im Hintergrund leicht drehen (so dass es mit den Stacheln nicht ganz so symmetrisch aussieht) und/oder die kleinen Bälle von den Ablagen entfernen.
Könntest du die Fläche im Hintergrund mal um 90 Grad drehen (und dann natürlich weniger Yards zeigen, damit es nicht so gestaucht wirkt), damit man einen Vergleich hat?
Die Drehung würde bewirken, dass die Endzonen sich im Verhältnis zur Spielfeldbreite zu dicht gegenüberliegen würden, das würde einfach nur falsch aussehen.
Das meinte ich mit meinem "weniger Yards anzeigen". Du würdest gar keine Endzonnen mehr sehen sondern nur einen 'Ausschnitt' des gesamten Spielfelds.
-
Ich finde den Ball symmetrisch jetzt garnicht mal schlecht…👍
-
Ich finde den Ball symmetrisch jetzt garnicht mal schlecht…👍
Das die Zacken so von hinten heraus 'stechen' stört dich nicht? Sollte man den Ball dann vielleicht etwas transparent machen? Oder vielleicht einfach ganz weg lassen?
-
Das meinte ich mit meinem "weniger Yards anzeigen". Du würdest gar keine Endzonnen mehr sehen sondern nur einen 'Ausschnitt' des gesamten Spielfelds.
Alle Deko fehlt jetzt erstmal.
-
Das meinte ich mit meinem "weniger Yards anzeigen". Du würdest gar keine Endzonnen mehr sehen sondern nur einen 'Ausschnitt' des gesamten Spielfelds.
Ich finde es wird von Version zu Version cooler.
Man könnte, da sich rechts bereits durch die Starspieler Stapel sehr viel rot rechts befindet, das blau und rot rechts links tauschen.
-
Nö - ich finde das gut so…
Was heißt schon „stören“? Irgendwann wird’s dann sehr „kleinklein“ und geht mehr in Sammlung persönlicher Präferenzen.
Klar gibts auch Eigenheiten, die ich vielleicht anders machen würde…aber das sind so Feinheiten, die ich eher unter meiner persönlicher Präferenz einordnen würde / mich aber nicht vorm ordern abhalten.
Wo ich bisher jedoch durchgehend ein Verfächter der alten Matte war, Ist das das erste Design, dass mich wirklich zum umswitchen überlegen lässt. Ich hab Angst, es wird jetzt eher verschlimmert😂
-
Das meinte ich mit meinem "weniger Yards anzeigen". Du würdest gar keine Endzonnen mehr sehen sondern nur einen 'Ausschnitt' des gesamten Spielfelds.
Alle Deko fehlt jetzt erstmal.
-
Ich finde den Ball symmetrisch jetzt garnicht mal schlecht…👍
Das die Zacken so von hinten heraus 'stechen' stört dich nicht? Sollte man den Ball dann vielleicht etwas transparent machen? Oder vielleicht einfach ganz weg lassen?
Vielleicht wenn er grösser ist?:
-
Das meinte ich mit meinem "weniger Yards anzeigen". Du würdest gar keine Endzonnen mehr sehen sondern nur einen 'Ausschnitt' des gesamten Spielfelds.
Ich finde es wird von Version zu Version cooler.
Man könnte, da sich rechts bereits durch die Starspieler Stapel sehr viel rot rechts befindet, das blau und rot rechts links tauschen.
Langsam verliere ich den Überblick :
-
Ich finde es wird von Version zu Version cooler.
Man könnte, da sich rechts bereits durch die Starspieler Stapel sehr viel rot rechts befindet, das blau und rot rechts links tauschen.
Langsam verliere ich den Überblick :
Ja, so ist das wenn man fremde Meinungen zulässt.
Aber so finde ich sie super.
Würde ich nichts mehr ändern.
-
f-p-p-m Was hat die Map, die du erstellt hast, für eine Auflösung. Das Bild hier hat nur 1920x853 Pixel, für eine Playmat ist das viel, viel zu wenig.
Du solltest mindestens eine Auflösung von 300dpi haben, alles andere wird unscharf und unleserlich. Bei einer Playmat von 30 x 14 Zoll (ca. 77cm x 35cm) wären das mindestens 9000x4200 Pixel.
-
f-p-p-m Was hat die Map, die du erstellt hast, für eine Auflösung. Das Bild hier hat nur 1920x853 Pixel, für eine Playmat ist das viel, viel zu wenig.
Du solltest mindestens eine Auflösung von 300dpi haben, alles andere wird unscharf und unleserlich. Bei einer Playmat von 30 x 14 Zoll (ca. 77cm x 35cm) wären das mindestens 9000x4200 Pixel.
Mein Original hat 300dpi und ist 810 x 360mm (2125 x 4783 Pixel) gross.
Einzig der Ball im Zentrum wirkt etwas verschwommen in voller Grösse.
Wenn diese Qualität nicht ausreicht bin ich wohl raus.
Ich arbeite nicht viel mit Grafiken und habe keine teuren Programme zur Verfügung und keine Ahnung von Photoshop.
Mein altes Corel Draw 7 (hat mir bisher immer gereicht) gibt nicht mehr her als max. 4800 x 4800 Pixel.
Wenn also meine Vorschläge doch jemandem gefallen und dieser jemand richtig Ahnung, Fähigkeiten und Ressourcen hat, dann einfach mal das Beste draus machen, was gewünscht wird haben wir ja jetzt herausgefunden
-
Danke an alle Bastler. Wird sicher super und ich freue mich schon drauf.
-
Bei 5 Spielern können theoretisch 5 verschiedene Fraktionen spielen, deshalb habe ich mal einen Versuch mit einer Matte gemacht, bei der PLatz für 5 Starspieler Stapel ist. Der verdeckte Highlight Stapel wäre eigentlich nichtmal nötig, alle im Spiel befindlichen Highlights liegen ja in der Mitte aus.
-
Bei 5 Spielern können theoretisch 5 verschiedene Fraktionen spielen, deshalb habe ich mal einen Versuch mit einer Matte gemacht, bei der PLatz für 5 Starspieler Stapel ist. Der verdeckte Highlight Stapel wäre eigentlich nichtmal nötig, alle im Spiel befindlichen Highlights liegen ja in der Mitte aus.
Also mit den Auflösungen und dem Druck kenn ich mich nicht aus welche Auflösung mindestens benötigt wird.
Die aktuelle Playmat im Ordner habe ich so schön drucken lassen und bin mit der Bildqualität sehr zufrieden.
Das letzte Bild mit den 5 Stapeln find ich nicht so schön, weil rechts und links die rot blauen Linien verschwinden.
5 Stapeln meinetwegen gern, dann aber irgendwie anders oder Matte länger machen.
-
Odaion ,sieh Dir mal an, ob diese Qualität reichen würde (jeder andere darf auch):
-
Äh, sehe ich das richtig, dass bei den Midden Moors Marauders die Verführungsmarker in den Regeln noch nicht erklärt wurden?
Ich arbeite gerade an einer "All in Spielhilfe", daher fiel es mir auf.
-
Ja, so ist das wenn man fremde Meinungen zulässt.
Aber so finde ich sie super.
Würde ich nichts mehr ändern.
Ich finde, der Ball in der Mitte (und die Blood Bowl Logos) sehen nicht gut aus und stören sehr! IMO den Ball ganz raus und die Logos entweder kleiner oder auch weg.
-
f-p-p-m Die Auflösung passt. Ich würde für alle Schriftzüge noch die Schriftart ändern. Im Moment dürfte das der Gutcruncher Font sein. Wenn es weniger stachelig sein soll, dann würde ich den Nuffle Font empfehlen und wenn es wie das Original sein soll, musst du den Black Beard Font verwenden. Der passt am besten und wird für alle Überschriften etc. verwendet.
BlackBeard Regular : Download For Free, View Sample Text, Rating And More On Fontsgeek.Com
Hast du alle Einzelbilder im Drive oder einen passenden Link zu den verwendeten Bildern?
-
Äh, sehe ich das richtig, dass bei den Midden Moors Marauders die Verführungsmarker in den Regeln noch nicht erklärt wurden?
Da lohnt nicht wirklich eine einzelne Regelseite, da alle relevanten Informationen direkt auf dem Succubus stehen. Es würde im Regelheft sonst nur nochmal der Kartentext stehen, und der steht ja schon auf der Karte
-
Habe jetzt nochmal einiges überarbeitet:
Rand bei den Turnieren und Schlagzeilen auch dünner.
Ball geändert
Verschiedene BB Schriftzüge (kleiner bzw. in den Endzonen)
Feld komplett ohne Ball und Schriftzüge
Zwei Playmats mit "Nuffle Font" hinzugefügt
Alle Versionen hier: https://drive.google.com/drive/folders/…CNo?usp=sharing
Auflösung könnte ausreichen.
-
Alle Versionen hier: https://drive.google.com/drive/folders/…CNo?usp=sharing
Ich finde, dass die 'Playmat Final (mit BB in den Endzonen)' am Besten aussieht.
Der Ball ist so gedreht schon viel besser, stört aber IMO schon doch sehr.
Fall mit Ball, würde ich das Logo trotzdem noch in die Endzonen packen (die Variante fehlt bisher).
-
Also mir gefällt die aus Beitrag #416 bis jetzt immer noch am besten.
Der realistische Ball auf den letzten Entwürfen wirkt für mich dagegen weniger schön und die Schriftzüge stören mich nicht.
P.S. Wenn es Plätze für alle 5 Starspieler geben soll, wäre ich mit der aus Beitrag #421 zufrieden.
f-p-p-m - Tausend Dank für deine Mühen
-
f-p-p-m Die Auflösung passt. Ich würde für alle Schriftzüge noch die Schriftart ändern. Im Moment dürfte das der Gutcruncher Font sein. Wenn es weniger stachelig sein soll, dann würde ich den Nuffle Font empfehlen und wenn es wie das Original sein soll, musst du den Black Beard Font verwenden. Der passt am besten und wird für alle Überschriften etc. verwendet.
https://fontsgeek.com/fonts/BlackBeard-Regular
Hast du alle Einzelbilder im Drive oder einen passenden Link zu den verwendeten Bildern?
Ich habe mich mal für den Nuffle Font entschieden.
-
Also mir gefällt die aus Beitrag #416 bis jetzt immer noch am besten.
Der realistische Ball auf den letzten Entwürfen wirkt für mich dagegen weniger schön und die Schriftzüge stören mich nicht.
P.S. Wenn es Plätze für alle 5 Starspieler geben soll, wäre ich mit der aus Beitrag #421 zufrieden.
f-p-p-m - Tausend Dank für deine Mühen
Ich denke es sind jetzt genug verschiedene Versionen für eine Abstimmung vorhanden, ich persönlich mag eine Version mit "Nuffle Font" und evtl. einem BB Schriftzug am Rand, ohne Ball in der Mitte, aber da gibt es sicher andere Meinungen genug.
Wichtig ist halt nur, sich auf eine Matte zu einigen!
Aber vielleicht bleibt es ja auch bei der ursprünglichen
Sollte eine Einigung erzielt werden, würde ich die finale Matte nochmal auf kleine Fehler überprüfen und diese dann beheben und die Matte zur Verfügung stellen.
-
Ich persönlich finde die Datei „Playmat Final (mit BB am Rand) am besten Finde den Schriftzug auch schön episch…
Den alten Ball fand ich (symetrisch) am besten - Aber der wird schon arg gezerrt bei der hohen Auflösung…der neue Ball ist mir zu wenig Comic - Das sieht ja aber auch ohne echt schick aus
-
Welche Playmat gefällt Dir für die Legendäre Edition am besten 34
Das Ergebnis ist nur für Teilnehmer sichtbar.
-
Puh - Ganz schön viele Möglichkeiten. Kannste zwei Auswahlmöglichkeiten zulassen? Mir ist der Font egal, aber ich hab mit „Playmat Final (mit BB am Rand)“ nen Favoriten für den Rest, vor den anderen 😂
Naja ich nehme jetzt einfach mal eine…😊👍
-
Puh - Ganz schön viele Möglichkeiten. Kannste zwei Auswahlmöglichkeiten zulassen? Mir ist der Font egal, aber ich hab mit „Playmat Final (mit BB am Rand)“ nen Favoriten für den Rest, vor den anderen 😂
Naja ich nehme jetzt einfach mal eine…😊👍
Habe jetzt sogar 3 Wahlmöglichkeiten gelassen
Wie viele machen eigentlich bei der Bestellung mit?
Und wie viele davon nehmen überhaupt eine Playmat?
Das würde so einiges über das Ergebnis der Abstimmung aussagen.
Hat jemand diese Infos?
-
Puh - Ganz schön viele Möglichkeiten. Kannste zwei Auswahlmöglichkeiten zulassen? Mir ist der Font egal, aber ich hab mit „Playmat Final (mit BB am Rand)“ nen Favoriten für den Rest, vor den anderen 😂
Naja ich nehme jetzt einfach mal eine…😊👍
Habe jetzt sogar 3 Wahlmöglichkeiten gelassen
Wie viele machen eigentlich bei der Bestellung mit?
Und wie viele davon nehmen überhaupt eine Playmat?
Das würde so einiges über das Ergebnis der Abstimmung aussagen.
Hat jemand diese Infos?
Aktuell 52 Bestellungen und davon 46 mit Playmat
-
Ich bin tatsächlich für die ursprüngliche Version. Macht am meisten her.
-
Ich bin ebenfalls weiterhin für die ursprüngliche Version. Habe auch dafür gestimmt, allerdings wird sie in den Ergebnissen nicht angezeigt. Die Hoffnung schwindet aber irgendwie auch kein Wunder bei gefühlt 200 Auswahlmöglichkeiten
-
Ich bin ebenfalls weiterhin für die ursprüngliche Version. Habe auch dafür gestimmt, allerdings wird sie in den Ergebnissen nicht angezeigt. Die Hoffnung schwindet aber irgendwie auch kein Wunder bei gefühlt 200 Auswahlmöglichkeiten
Hatte ich auch zuerst. Beim aktualisieren der Seite konnte ich dann weitere Ergebnisse anzeigen lassen.
Die ursprüngliche Matte führte mit 24%.
-
Ich habe jetzt im Google Drive etliche Playmats die druckreif sind und würde gerne wissen, ob überhaupt jemand Interesse an deren Verwendung hat, oder aber, ob die ursprünglich vorgesehene Playmat besser ankommt.
Meine Matten hier:
https://drive.google.com/drive/folders/…CNo?usp=sharing
Beispiel:
Ursprünglich geplante Matte:
Nur der Form halber, die ursprüngliche Playmat ist folgende:
Bin aber tatsächlich auch Fan der neuen Alternative mit Comicball, BB am Rand und Nuffle Font.
-