Moin zusammen,
Ich habe beschlossen meine Posts hierher auszulagern um den allgemeinen "Spiele mit 3D Druck pimpen" Thread nicht zu sehr in Anspruch zu nehmen, dazu hat dann jeder die Möglichkeit den Thread auf Stumm zu stellen den es nicht interessiert. Ich möchte hier meine Designs teilen und dazu ein paar Worte sagen und, gerne stehe ich auch für Fragen oder Verbesserungsvorschläge zur Verfügung. In Zukunft erfahrt ihr hier auch was es neues gibt.
Meine Designs verkaufe ich auf Cults3D (https://cults3d.com/de/drucklisten/SL-3D/brettspiel-inserts) für jeweils maximal 5€.
Gedruckt können sie in meinem Shop (https://sl-3d.de) erworben werden oder ihr kontaktiert mich einfach hier per PN.
Üblicherweise gibt es eine Version für gesleevte Karten und für ungesleevte sofern Karten im Spiel enthalten sind.
Eine Idee die ich hier von Depa übernehme, da ich sie sehr fair finde:
Mitglieder dieses Forums, die die kleine Gebühr für die 3D Dateien nicht bezahlen möchten dürfen sich gern per PN melden, ich stelle die Dateien dann kostenlos zur Verfügung, ich verstehe das und Urteile nicht, keine Sorge.
Hier liste ich meine bisherigen Posts auf, für einen schnelleren Zugriff auf das was euch interessiert oder um zu sehen ob euch überhaupt etwas interessiert
Brettspiel Inserts von mir (SL-3D.de)
-
slade_the_dragon -
18. April 2024 um 10:14 -
Unerledigt
-
-
Ich stelle mich erst einmal vor, ich bin Sascha und betreibe seit einem Jahr einen kleinen ETSY Shop für Brettspiel Upgrades und Inserts.
Die Reise begann 2021, als ich von meiner Freundin einen 3D Drucker zu Weihnachten bekam, einen Anycubic i3 Mega, sie sagt seit dem sie hätte ein Monster geschaffen
Naja ich fing natürlich an mit diversen Drucken die ich mir aus den einschlägigen Quellen besorgt habe.
Relativ schnell war klar, ein Drucker reicht mir nicht, es geht alles zu langsam, also kam ein zweiter Anycubic i3 Mega dazu. Es wurden einige Upgrades vorgenommen (Magnetbett, neue Wellen, Lager usw.), bis ich an die nächste Grenze kam, die der Druckbettgröße, also kaufte ich einen TRONXY 330 Drucker, der leider nie wirklich gut gedruckt hat.Eine weitere Grenze war die, dass ich immer öfter nicht fand was ich wollte und so Anfing mich mit dem 3D Design zu beschäftigen. Mein Tool der Wahl ist dabei noch immer Autodesk Fusion (Früher Fusion 360).
Der TRONXY musste relativ schnell wieder gehen, dann zog der erste Prusa MK4 ein, zusammen mit der Gewerbegründung.Mittlerweile setze ich ganz auf Prusa, habe 3 Prusa MK4 Drucker und warte auf einen Prusa XL 5 Kopf Drucker.
Die Evolution meiner Inserts lässt sich dann in den nächsten Posts nachvollziehen, Ich kopiere nun zunächst nach und nach meine bisherigen Posts aus dem anderen Thread und erweitere sie um einige weitere Fotos. -
Mein erstes 3D Druck Insert, das ich damals selbst entwickelt habe war das für Marco Polo, ich fand einfach nichts richtig passendes online und versuchte mich so selbst am digitalen Zeichenbrett. Mittlerweile mach ich das nebenberuflich im Kleingewerbe und habe natürlich einiges dazugelernt, aber das waren die Anfänge und daher bin ich auch hier stolz drauf
Es hat auch vor nicht allzu langer Zeit ein Facelift bekommen, das Design ist nicht mehr ganz das von damals. -
Das nächste Insert das ich entwickelt habe war dann schon etwas Gehirnschmalzlastiger Viele Stunden Youtube und üben mit Fusion 360 später war es dann fertig: Bonfire.
Ich hatte sofort die Idee im Kopf mit den Playertrays und dem eingeschobenen Tableau, also habe ich mich zuerst daran gemacht und drumherum den Rest gebastelt. Später sollte sich herausstellen, dass ich meist so arbeite, eine Sache will ich umsetzen und der Rest hat sich zu fügen Dennoch soll alles logisch aufgeteilt sein und zu schnellem Spielauf- und abbau beitragen. Bei diesem ist mir das denke ich gut gelungen.
Als Trees & Creatures erschien habe ich mich nochmal drangesetzt und eine Version inkl. Erweiterung entwickelt. Dazu musste leider jedes einzelne Bauteil geändert werden. Nun gut, hier ist es:
-
Eingeschobene Spielmaterial-Deckel bei den Spielertrays. das wurde dann irgendwie zu meinem Markenzeichen. Wann immer das geht werd ich es auch wieder machen, das ist einfach toll
Auch bei meinem nun folgenden Insert habe ich das gemacht, und zudem gut Platz im Schrank gespart indem ich die Erweiterung integriert habe, bei Glen More II Chronicles. An der "Gravur" des Schriftzugs und der Siegpunktgrafik saß ich eine gefühlte Ewigkeit, alles nur abgemalt, keine digitalen Hilfsmittel verwendet Würde ich so auch nicht mehr machen.
Aber es ist ein wirklich schönes Insert geworden finde ich
-
Kommen wir nun zu einem Insert das sicherlich insgesamt die meiste Zeit beansprucht hat und welches am häufigsten über die ganze Welt gedruckt wurde, außerdem ein Dauerbrenner in meinem ETSY Shop mit den bei weitem meisten Verkäufen. Barrage / Wasserkraft
Auch hier haben wir wieder die Charakterkarten als Deckel für die Spielertrays. Außerdem gibt es mittlerweile einfach keinen Millimeter Platz mehr im Karton nachdem ich später noch die Nil Delta Erweiterung mit integriert habe sowie die Minierweiterung Geological Factors.
Es passt alles rein, was bis zum letzten Kickstarter erschienen ist. die beiden neuesten Maps (Duel und Colorado) werden nicht mehr unterkommen, aber da eine Big Box angekündigt ist wird das Projekt mich wohl auch in Zukunft wieder beschäftigen Ich freue mich schon sehr darauf
PS: Ach ja, der Würfel. Ja im Spiel liegt kein Würfel bei, wir nutzen ihn um auf dem 5-Spielerbrett auszuwürfeln wo die Start-Dämme hingestellt werden, da hierfür nicht genügend Pappkärtchen beiliegen. Daher gibt es auch einen Würfelplatz im Insert.
PS²: Die Münzen sind von Moedas & Co in Brasilien, die finde ich sind schöner als die direkt von Cranio vertriebenen, da sie näher am Original sind von der Größe her und wesentlich höhere Qualität, leider mit Versand sehr teuer. -
Beim Insert für Golem war mir besonders wichtig, dass man die Synagoge nicht auseinandernehmen muss um das Spiel einzuräumen und die Kugeln nicht lose umherfliegen. Das hat finde ich auch sehr gut funktioniert mit dem Plastikteil als Deckel für die Kugeln. Außerdem sollten die Deluxe Ressourcen einen Platz finden. Dazu habe ich verstärkt darauf geachtet, dass Material für den Spielaufbau zusammen verstaut wird, Spielermaterial getrennt ist und allgemeine Vorräte direkt aus der Box auf den Tisch gestellt werden können.
-
Ein großer Meilenstein für mich ist das Ultimate Railroads Insert. Dieses sollte der Grund werden ein Gewerbe zu gründen, zwar erst ca. 1 Jahr nach der Entwicklung des Inserts aber dazu komm ich noch.
Von vornherein war mir klar, dass ich das Spielermaterial komplett im Zugriff und sauber sortiert haben möchte, außerdem dauerte der Spielaufbau mir viel zu lang und man musste immer wieder was nachschlagen, also habe ich zum ersten Mal ein Insert mit 2 Farb-Druck entwickelt und Hinweise direkt auf die Boxen geschrieben. Der Spielaufbau ist damit in 2-3 Minuten erledigt und man kann sofort losspielen, das hat vorher gut mal 20minuten gedauert.Der Grund für das Gewerbe war, dass eben dieses Insert später ohne mein Zutun bei Better Board Games auf dem Youtube Kanal vorgestellt wurde. Ich hab immer mal wieder ein Insert bei eBay eingestellt um meine Kosten etwas zu reduzieren, fiel aber laut befreundetem Steuerberater immer alles unter Liebhaberei, eben so 5-10 Inserts pro Jahr. Nachdem das Insert vorgestellt wurde erhielt ich in kürzester Zeit über 20 Anfragen und dadurch entschied ich mich das ganze doch mal offiziell anzugehen und ein Kleingewerbe anzumelden.
Hier der Link zum Video:Externer Inhalt www.youtube.comInhalte von externen Seiten werden ohne deine Zustimmung nicht automatisch geladen und angezeigt.
Und nun die Fotos des Inserts -
PS²: Die Münzen sind von Moedas & Co in Brasilien, die finde ich sind schöner als die direkt von Cranio vertriebenen, da sie näher am Original sind von der Größe her und wesentlich höhere Qualität, leider mit Versand sehr teuer.
Die haben mittlerweile immer mehr Vertriebspartner in Europa. Ich habe meine Münzen aus der Schweiz - die gibt es aber auch bei Philibert und einigen anderen. Siehe hier.
-
Die haben mittlerweile immer mehr Vertriebspartner in Europa. Ich habe meine Münzen aus der Schweiz - die gibt es aber auch bei Philibert und einigen anderen. Siehe hier.
Ja nur durch die Marge des Zwischenhändlers und immer noch Versand aus dem Ausland sind die nicht viel günstiger, wenn überhaupt, , ich warte halt bis ich mal wieder 3-4 Sets haben möchte und bestelle direkt in Brasilien. Da sind sie auch immer verfügbar. Die neuen Ultimate Railroads Münzen sind auch schon wieder toll
-
Das erste Insert welches ich dann nach Eröffnung des Shops entwickelt habe ist das Coffee Traders Insert, hier habe ich auch wieder sehr viel Augenmerk darauf gelegt, dass das Spiel schnell aufzubauen ist. Daher ist das Spielmaterial so aufgeteilt dass es direkt an die richtige Stelle kommt, es gibt Trays für den Aufbau des persönlichen Tableaus und für den persönlichen Vorrat, welche für den Spielbrettaufbau und die Wertungsbereiche sowie Arabica-Leiste. Was zunächst etwas weniger sortiert wirkt ist im Punkto Spielaufbau eine große Hilfe.
Es soll bald eine Erweiterung erscheinen, daher werde ich wohl hier noch einmal ranmüssen in Zukunft. Ich versuche dabei natürlich so wenig zu verändern wie möglich um ein günstiges Upgrade zu ermöglichen.
-
Wir taten uns zunächst schwer, da wir Terra Mystica sehr mögen, aber nach einigen Rezensionen zog dann doch Age of Innovation ein und wir haben es nicht bereut. auf Grund der großen Materialmenge war es klar dass dafür ein Insert entwickelt werden muss.
Ich steh drauf kleine Gimmicks einzubauen welche mir spontan einfallen, daher sieht in diesem Insert das Büchertray einem Buch ganz ähnlichDas Material ist darin logisch aufgeteilt für den Spielauf- und Abbau. Außerdem passen zusätzliche Deluxe Komponenten wie Metallmünzen und Meeple Werkzeug-Arbeiter auch hinein. Die jeweiligen Vorräte sind doppelt vorhanden um die Erreichbarkeit in größeren Runden zu erleichtern.
Problematisch war hier, dass zuletzt eine Spielkopie bei jemandem aufgetaucht ist, die leicht dickeres Material hatte als meine vom Ende letzten Jahres. 0,1mm, klingt nach nicht so viel, aber wenn man z.B. 17x0,1mm addiert reißt das schonmal an der ein oder anderen Stelle an der Maßzugabe, und so wars. Es passte z.b. nur ein Plättchen weniger irgendwo rein. Das musste ich dann natürlich überall ändern und insgesamt 8 Teile anpassen. Das ist nun zum Glück erfolgreich passiert und man kann es wieder bedenkenlos drucken. -
Excavation Earth inkl. Erweiterungen, Promos und Metallmünzen
Bei diesem Insert habe ich 3D Druck mit Stoffbeuteln kombiniert. Zum einen müssen die Ausgrabungsstücke dann nicht immer gemischt werden und zum anderen gibt es ein wenig ein "Grabungs"-Gefühl durch das ziehen aus dem Beutel Die Teile aus der Museumserweiterung habe ich in einem schwarzen Beutel untergebracht mit einem gedruckten Anhänger der auf die Erweiterung hinweist. Es gibt bei meinen Druckdateien allerdings auch eine alternative für die Beutel zum Drucken.
Dazu habe ich alle 3D-Teile diesmal in alle Richtungen abgerundet, das führt zu weniger Warping auf etwas schlechter haftenden Druckbetten und sieht insgesamt edler aus. Die Beschriftung der Module hilft bei der Auswahl und natürlich wie immer ist es auf schnellen Aufbau ausgerichtet und ich habe für das Solo-Spiel 40 weiße Würfel hinzugefügt damit keine 2 anderen Farben verwendet werden müssen. -
Ich habe einfach mal die Gelegenheit genutzt und Schälchen bei Sascha geordert.
Ich finde, die haben eine gute Größe. Zum einen passen alle noch so dicken Patschehändchen rein, zum anderen kann man aber auch gut wenige Klötzchen entnehmen bzw. großvolumiges Zeug zwischenlagern. Wer seinen Stuff in Ziplocks hortet wird seine Freude daran haben, da man über die Ecken diese prima wieder einräumen kann.
Böse Menschen (= Ehefrau) behaupten, dass da auch Chips und anderes fettiges Zeug reinpassen... ...zur Strafe werde ich ihr Näh- und Bastelzeug durcheinanderbringen oder sie die Steuerklärung selbst machen lassen - aber ich schweife ab.
Die Schalen sind super stapelbar und damit im Spiele-Zubehör-Schrank sicher gern gesehen. Das Logo kann man laut Sascha auch weglassen, aber warum sollte ich das tun?
Bezahlung per Paypal, Produktion und Versand als Warensendung ging innerhalb einer Woche vonstatten. Selbst da habe ich nichts zu meckern. Verpackung war gut, Verarbeitung ohne Makel.
-
Vielen Dank für dein tolles Feedback. Freut mich wirklich sehr
Um kurz darauf zu reagieren, dass man ja Snacks in die Schälchen packen könnte, auch wenn's mehr als Scherz gemeint war.
Das PLA an sich ist Lebensmittelgeeignet, aber dadurch, dass 3D-Druck immer in Schichten vonstatten geht hat man immer feine Rillen in denen sich Bakterien niederlassen wenn dort Essensreste drin sind, die beim Spülen, durch die Oberflächenbeschaffenheit nie mehr zu 100% entfernt werden können. Daher ist das nicht empfohlen.Davon ab wünsch ich dir dass sie gute Dienste erweisen
-
Schon ein ganzes Jahr, die Zeit vergeht wie im Flug, zur Feier gibt es Gewinnspiel und weitere Specials im Mai, die ich gern mit euch teilen möchte
(Denkt beim Gewinnspiel daran, dass ihr den Originalbeitrag liket und teilt sonst kommt ihr nicht in den Lostopf) -
Wenn ich nicht auf Facebook bin, kann ich nicht teilnehmen?
-
Wenn ich nicht auf Facebook bin, kann ich nicht teilnehmen?
Ist leider schwer zu verwalten sonst, die anderen Aktionen sind natürlich auch für dich zugänglich, und fürs Gewinnspiel schau ich mal ob ich eine alternative Teilnahmemöglichkeit finde.
-
Hi slade_the_dragon , ist das #MarcoPolo Insert inkl aller Erweiterungen?
-
Hi slade_the_dragon , ist das #MarcoPolo Insert inkl aller Erweiterungen?
Ja genau, das ist all in, inkl. Gefährten, Neue Charaktere und Geheimwege
-
Wenn ich nicht auf Facebook bin, kann ich nicht teilnehmen?
So, ich hab mir was überlegt, und zwar können Mitglieder dieses Forums auch teilnehmen indem sie meinen Shop zu den Lieblingsshops hinzufügen und mir bei ETSY eine Nachricht zukommen lassen mit ihrem unknowns Namen, damit ich das zuordnen kann.
Zudem nochmal der Aktionstext von Facebook falls ihr es dort nicht lesen könnt:1 Jahr SL-3D.de (https://l.facebook.com/l.php?u=https%…4f3wbUCE6srv_ff)
Vor einem Jahr habe ich diese Reise gestartet, unglaublich dass es schon ein Jahr her ist. Es gibt jedenfalls zur Feier diesen Monat einige Specials die ich gerne mit euch teile
Gewinnspiel: *wie oben beschrieben* Zu gewinnen gibt es folgende Preise
- 1x einen Gutschein über 40€ für meinen ETSY Shop
- 1x ein 3D Insert für Wasserkraft / Barrage inkl. Update für "New Lands".
- 1x Die Erweiterung Colorado Connection für Wasserkraft / Barrage (Englisch)
- 1x Die Erweiterung Nile Affairs / Nildelta für Wasserkraft / Barrage (Englisch)
- 1x Sechs SL-3D.de Token-Schälchen in Farben eurer Wahl
Die Gewinner werden per Zufall ermittelt und via Messenger benachrichtigt.
2-tägig wechselnde Geburtstagsangebote: Im Mai ist alle 48 Stunden ist ein anderer Artikel 25% rabattiert, nur solange der Vorrat reicht! https://l.facebook.com/l.php?u=https%…4f3wbUCE6srv_ff
Habt ihr eure Lieblings-Artikel favorisiert werdet ihr von ETSY benachrichtigt sobald es los geht
Alle 3D-Dateien mit 50% Rabatt, den gesamten Mai mit dem Coupon Code "1YEAR"! https://l.facebook.com/l.php?u=https%…4f3wbUCE6srv_ff
Für die neueste Erweiterung zu Wasserkraft / Barrage werde ich ein Insert-Update designen welches alle bisherigen Käufer zu einem günstigen Preis kaufen können. Die Dateien werden für alle die sie bereits heruntergeladen haben gratis zur Verfügung gestellt und dem Cults3D Paket hinzugefügt. -
Das kleine Update für das Barrage/Wasserkraft Insert ist schonmal fertig, v4.5.
Die beiden Teile ersetzen ein Spielbrett im Karton. Wenn alle Erweiterungen vorhanden sind hebt sich der Deckel um ca. 24mm, meine Empfehlung ist allerdings 3 Spielbretter in einem Erweiterungskarton unterzubringen um das zu vermeiden.
Am großen Update v5 arbeite ich noch.
Es wird etwas luftiger im Karton da ich alle 4 Erweiterungsbretter in einer Erweiterungskiste unterbringe, außerdem wird alles etwas umarrangiert.
Manche Teile bleiben von den Abmessungen gleich, daher wird's auch einen etwas abgespeckten Updatepfad geben (v4.9) -
slade_the_dragon Welche Erweiterungen sind denn in der Version 4.5 möglich?
-
slade_the_dragon Welche Erweiterungen sind denn in der Version 4.5 möglich?
Alle, es müssen nur 3 Bretter rausgenommen werden damit der Deckel nicht hochsteht.
Es ist auch die Version die man im Gewinnspiel oben gewinnen kann, ganz nebenbei -
slade_the_dragon Welche Erweiterungen sind denn in der Version 4.5 möglich?
Alle, es müssen nur 3 Bretter rausgenommen werden damit der Deckel nicht hochsteht.
Es ist auch die Version die man im Gewinnspiel oben gewinnen kann, ganz nebenbeiStark. Na da bin ich ja auf weitere Bilder gespannt.
Ich habe das 3D-Board in einem Erweiterungskasten und die anderen Komponenten in der Hauptbox, inkl. aller ExOs, deren Meeple, zusätzlichen Maschinen und Geological Factor. -
Stark. Na da bin ich ja auf weitere Bilder gespannt.
naja 4.0 ist ja dieses mit den Erweiterungen bis vor New Lands (inkl Geological Factors), quasi mit der Aufteilung so wie du sie hast:
RE: Brettspiel Inserts von mir (SL-3D.de)
4.5 sind die zwei Teile im Bild hier: RE: Brettspiel Inserts von mir (SL-3D.de)
Die beiden neuen Teile kommen oben auf und bilden mit dem 4.0 Insert die Version 4.5, wenn man New Lands hat stehen 3 Boards über den Karton hinaus. Ich stelle heute Abend mal eine Explosionszeichnung rein
5.0: Nach aktueller Planung stehen alle 4 Erweiterungsboards aus dem Grundspiel Karton heraus (Müssen also in einen Erweiterungskarton)
Dafür haben alle Teile wieder etwas mehr Luft und eine andere Aufteilung, noch bin ich dabei zu designen. Fotos folgen natürlich.
4.9: Es sieht im Moment so aus, dass die Spielertrays von den äußeren Abmessungen gleich bleiben, es somit also möglich wäre nur die (bei mir) oliv farbenen Teile neu zu drucken um annähernd auf die 5er Version zu kommen. -
Sehr interessant - an dem neuem Wasserkraft Insert wäre ich interessiert. Ob dann 2, 3 oder 4 Boards ausgelagert werden spielt dann ja eigentlich auch keine Rolle 😉
-
Sehr interessant - an dem neuem Wasserkraft Insert wäre ich interessiert. Ob dann 2, 3 oder 4 Boards ausgelagert werden spielt dann ja eigentlich auch keine Rolle 😉
Das sehe ich halt auch so, Hauptsache eins geht noch mit rein, damit man ein komplettes Spiel in einer Box mitnehmen kann, egal welche Karte man spielen möchte, deshalb erhöhe ich lieber den Komfort bei den anderen Teilen des Inserts, aber es ist wieder ne ganz schöne Tüftelei
-
Vorab, das Gewinnspiel läuft noch, und es sind aktuell nicht viele Lose vergeben, die Chancen stehen also sehr gut z.B. das neue Wasserkraft Insert zu gewinnen welches ich gerade designe.
Kleines Design Tagebuch
Ich ermittle den verfügbaren Platz und überlege mir grob wie etwas aussehen könnte, hier am Beispiel des neuen Barrage v5 Resourcentrays
Erster Versuch, Münzfächer deutlich überdimensioniert, Maschinenfächer nicht komfortabel, zudem musste ich noch etwas in der vorgesehenen "Lücke" unterbringen->
Neuer Versuch, die Münzfächer sind schon OK, bei den Maschinen habe ich ein Platzproblem, außerdem würden die kleinen Teile bei Nutzung aus dem Fach fallen und umherfliegen. Ich habe allerdings festgestellt, dass die Schrägen sehr viel Komfort bringen wenn sie den richtigen Winkel haben->
Mit der dritten Version war ich dann zufrieden, alles ist schön sortiert, ausreichend groß dimensioniert und man bekommt die Teile auf Grund der einseitigen Schräge sehr gut heraus, trotz der eher geringen Fachgröße für die größeren Maschinen.-> -
Wasserkraft v5
Das war wieder eine ganz schön kniffliges Ding
Ich wollte mehr Platz für Ressourcen und eine insgesamt etwas luftigere Aufteilung erreichen, das hat geklappt Außerdem sind nun alle Spielerzahlabhängigen Komponenten unten untergebracht (2 Spieler, 5 Spieler und Automa). Vereinzelt trat das Problem auf, dass nicht alle Automakarten in das Insert passten, das sollte nun ebenfalls behoben sein.
Die Spielertrays habe ich etwas gefaceliftet, die Außenmaße sind aber gleich geblieben, also kann man diese weiternutzen wenn man ein Update machen möchte.
Am Ende bin ich sehr zufrieden mit dem Insert und möchte es gern mit euch teilen. 4 Maps müssen in einer Erweiterungsbox unterkommen, alternativ würde der Deckel ca. 3cm hochstehen, das ist nicht mein Ding, aber wer das möchte kann natürlich auch das tun.
Wenn man das Spiel mitnehmen möchte und schon weiß welche Karte gespielt werden soll, dann reicht weiterhin ein Karton für die Reise, das war mir auch wichtig, und man muss keine Kleinteile umräumen um das zu erreichen. -
Das sieht sehr gut aus! Vielen Dank für deine Mühen.
Sobald mein Drucker wieder Luft hat werde ich es mir auch ausdrucken und dann schaut es in der Box wieder aufgeräumt aus -
aaahhhh von dir hab ich also damals das wasserkraft und das ultimate railroads inlay gekauft glaub ich. hast/hattest du auch nen store aug ebay? oder hab ich da bei nem copycat gekauft?
egal. werde wie oben beschrieben bei etsy kucken und upgrade für wasserkraft bestellen. coole designs übrigens.
-
aaahhhh von dir hab ich also damals das wasserkraft und das ultimate railroads inlay gekauft glaub ich. hast/hattest du auch nen store aug ebay? oder hab ich da bei nem copycat gekauft?
Ja das war sicher ich (hoffentlich 😅)
Danke sehr, freut mich dass es gefällt. Falls du Etsy gebühren sparen möchtest schreib mir gern hier dann biete ich es dir günstiger an ohne Etsy Gebühren
-
Darf man fragen wie viele Ultimate Railsroads inserts du schon verkauft hast?
Es interessiert mich, wie viele Leute bereit sind, mehr Geld für ein Insert als für das Spiel an sich auszugeben.
Ich bin noch relativ neu im Brettspielgame und habe da aktuell noch Hemmungen
Die Inserts sind allerdings der Hammer!
-
Darf man fragen wie viele Ultimate Railsroads inserts du schon verkauft hast?
...
Die Inserts sind allerdings der Hammer!
Danke sehr, klar, ist für mich kein Geheimnis, etwas über 50 Stück sind's Jeder muss natürlich selbst wissen was einem das Wert ist.
Vor allem bei Ultimate Railroads ist es eben so, dass man mit dem Insert in 2 min das Spiel starten kann, was mit Zip-Tüten ganz sicher nicht zu schaffen ist. -
-
ich wüßte nciht warum man bei URR Ziptüten bräuchte (wenn man es denn liegend und nicht stehend lagert)
Wenn ich das Material ausreichend sortieren möchte (Was mit den 12 großen Fächern ehrlicherweise schwierig ist) brauche ich mindestens Tüten.
Wie auch immer man es macht, man muss schon mehr Zeit für den Aufbau einplanen Aber sowas führt zu Grundsatzdiskussionen und die will ich überhaupt nicht führen. Es wird ja niemand dazu gezwungen ein Insert für ein Spiel zu kaufen oder zu drucken, ebenso verhält es sich mit Sleeves, Overlays oder gepimpten Ressourcen. -
Der letzte Tag des Gewinnspiels, und die Gewinnchancen sind aktuell wirklich noch riesig, also wer noch ein Insert für Wasserkraft braucht oder eine Erweiterung, oder bald mit einem 40€ Coupon in meinem Shop stöbern möchte sollte vielleicht die Chance ergreifen noch teilzunehmen
BeitragRE: Brettspiel Inserts von mir (SL-3D.de)
[…]
So, ich hab mir was überlegt, und zwar können Mitglieder dieses Forums auch teilnehmen indem sie meinen Shop zu den Lieblingsshops hinzufügen und mir bei ETSY eine Nachricht zukommen lassen mit ihrem unknowns Namen, damit ich das zuordnen kann.
Zudem nochmal der Aktionstext von Facebook falls ihr es dort nicht lesen könnt:
1 Jahr SL-3D.de (https://l.facebook.com/l.php?u=https%…4f3wbUCE6srv_ff)
Vor einem Jahr habe ich diese Reise gestartet, unglaublich dass es schon ein Jahr her ist. Es…slade_the_dragon2. Mai 2024 um 11:55 -
Das Gewinnspiel ist ausgelost, alle Gewinner haben eine Nachricht von mir erhalten!
-
Schade, nix gewonnen. Aber das Excavation Earth Insert zum reduzierten Preis war definitiv auch ein Hammer! Tolles Teil!
-