Abartig gut! Ich will gar nicht wissen, wie viel Zeit alleine in den Panzer geflossen ist mit den ganzen Kantenakzenten usw.
Und was habt ihr so bemalt...?
-
[Tom] -
23. August 2018 um 10:13 -
Unerledigt
-
-
Bin auch mal wieder zum Malen gekommen und habe den Raven Clan in blood Rage bemalt.
-
Mal wieder was neues von der KDM-Front, dieses Mal war der Lion Knight an der Reihe.
Die drei leicht bekleideten Damen auf seiner Base sind finde ich keine schönen Modelle, also wurden die wegrationalisiert^^
Bemalt sieht man ihn ja gerne in satten Farben, um sein theatralisches Auftreten zu unterstreichen. Nun - leuchtende Farben sind ja nunmal nicht so meine Welt, daher habe ich mich entschieden bei dem zu bleiben was ich kann und mag. Düster, bisschen verwittert, Dark Souls. Ist auch theatralisch.
Die Idee für die Showdown-Regelbuch-Seiten als Freehand habe ich von einem anderen Maler übernommen, das fand ich zu witzig um es nicht zu machen. 😅
-
Die Idee für die Showdown-Regelbuch-Seiten als Freehand habe ich von einem anderen Maler übernommen, das fand ich zu witzig um es nicht zu machen. 😅
Sieht super aus. Hammer! Echt cool.
Übrigens: Ich hasse dich!😅
-
Danke dir 😂
Lass alles raus 🖤
-
Mal wieder was neues von der KDM-Front, dieses Mal war der Lion Knight an der Reihe.
Die drei leicht bekleideten Damen auf seiner Base sind finde ich keine schönen Modelle, also wurden die wegrationalisiert^^
Bemalt sieht man ihn ja gerne in satten Farben, um sein theatralisches Auftreten zu unterstreichen. Nun - leuchtende Farben sind ja nunmal nicht so meine Welt, daher habe ich mich entschieden bei dem zu bleiben was ich kann und mag. Düster, bisschen verwittert, Dark Souls. Ist auch theatralisch.
Die Idee für die Showdown-Regelbuch-Seiten als Freehand habe ich von einem anderen Maler übernommen, das fand ich zu witzig um es nicht zu machen. 😅
Um mich nicht in diversen Lobhudeleien zu verlieren, pick ich mir mein Lieblingsdetail raus.
Der Mantel…alter… DER MANTEL!
-
Wow, das ist absolut insane, was du da in das Buch gemalt hast! Big props!
-
-
Hab mir jetzt auch mal die Starterbox, zwei größere Schiffe und jede Menge Bling Bling gegönnt.
Um das Spiel schleiche ich gedanklich schon eine ganze Weile herum.
-
Bin ich zufrieden? Auf keinen Fall!
Bin ich froh, endlich an was anderem zu malen? Absolut!
-
Wann ist man schonmal zufrieden 😁 Schick, schöne Farben in den Hörnern!
-
-
-
Brauch jetzt nur noch Magnetfolie für die Box (leider größer als A4). Basen sind aus 2 mm Stahl. Jemand Tipps dazu?
Ich hab sowas ähnliches vor zig Jahren mit Warhammer Fantasyregimentern versucht und kann da eigentlich nur abraten. Die Magnetfolien haben eine so schwache Haftkraft, das die selbst bei den ca. 15x10cm großen Flächen bei einem Stoß gegen die Transportbox nicht richtig gehalten haben.
Bin dann später auf Neodymmagnete umgestiegen. Die Bases bei meinen Minis waren unten hohl, da konnt ich 5x1 oder 5x2mm Magnete einfach mit Sekundenkleber befestigen und die hielten dann auch wie gewünscht die Minis am Platz.
-
Brauch jetzt nur noch Magnetfolie für die Box (leider größer als A4). Basen sind aus 2 mm Stahl. Jemand Tipps dazu?
Sind deine Bases aus richtigem Stahl/Eisen und würden auf Magneten halten ?
Es wäre dann umgekehrt zu Standart, aber auch das sollte gehen.
Die Fläche deiner Bases könnte groß genug sein, um mit Magnet-/Ferrofolie zu halten.
z.B. sowas: Selbstklebende Magnetfolien und Gummi-Stahl Folien
Ich arbeite quasi nur noch mit Folie bei Plastik/Resin-Modellen, das hält ziemlich gut.
Entscheidend sind Gewicht und Haltefläche, bei hohem Gewicht würde ich jedoch
auch auf Neodyms setzen.
Der Effekt der Klebefolie verstärkt sich zudem, wenn eine Seite aus richtigem Eisenblech
besteht.
-
Gestern, noch bevor ich ihm den finalen Schlag geben konnte, hat sich der Butcher von seiner Base gelöst .
Ich hab ihn damals einfach so auf den Stein (ein echter Stein) geklebt und das hat bis jetzt auch echt lange gehalten.
Hat jemand nen Tip, wie ich ihn da wieder drauf bekomme? Stiften würde ich gerne vermeiden, mein Hobbybohrer geht so schlecht durch Stein. Würde Epoxy Putty halten? Damit hab ich zumindest schon den Stein auf der Base befestigt. Der geht jetzt schwer wieder ab...
-
Brauch jetzt nur noch Magnetfolie für die Box (leider größer als A4). Basen sind aus 2 mm Stahl. Jemand Tipps dazu?
Sind deine Bases aus richtigem Stahl/Eisen und würden auf Magneten halten ?
Es wäre dann umgekehrt zu Standart, aber auch das sollte gehen.
Die Fläche deiner Bases könnte groß genug sein, um mit Magnet-/Ferrofolie zu halten.
z.B. sowas: Selbstklebende Magnetfolien und Gummi-Stahl Folien
Ich arbeite quasi nur noch mit Folie bei Plastik/Resin-Modellen, das hält ziemlich gut.
Entscheidend sind Gewicht und Haltefläche, bei hohem Gewicht würde ich jedoch
auch auf Neodyms setzen.
Der Effekt der Klebefolie verstärkt sich zudem, wenn eine Seite aus richtigem Eisenblech
besteht.
Ja, das ist Stahl und Magnetisch. Hab jetzt mal gewogen. Aufgrund des Gewichts werden es wohl Neodym Magnete werden (müssen). Los geht's bei den kleinen bereits mit 20 dann 44, 68, 112 bis zu Stattliche 192 Gramm für das große Schiff
Werde mir wohl Selbstklebenden Satin oder ähnliches in schwarz holen und Löcher für die Magnete schneiden und das dann auf den Boden der Stapelbaren Displayboxen (Trumpeter 0908) kleben. Denke das wird ne schöne Lösung.
Wobei halt nirgends steht wie schwer die Figuren bei Magnetfolie sein dürfen. Hier halten die Schiffe
-
Gestern, noch bevor ich ihm den finalen Schlag geben konnte, hat sich der Butcher von seiner Base gelöst .
Ich hab ihn damals einfach so auf den Stein (ein echter Stein) geklebt und das hat bis jetzt auch echt lange gehalten.
Hat jemand nen Tip, wie ich ihn da wieder drauf bekomme? Stiften würde ich gerne vermeiden, mein Hobbybohrer geht so schlecht durch Stein. Würde Epoxy Putty halten? Damit hab ich zumindest schon den Stein auf der Base befestigt. Der geht jetzt schwer wieder ab...
Es gibt so Zwei-Komponenten-Sekundenkleber, der ist wie Schweißen.
Damit geht es auf jeden Fall. Kann aber sein, dass du die Naht dann noch etwas nacharbeiten musst.
-
Weiter geht die wilde #CthulhuWars -Sause, die blaue Fraktion wächst an. Diesmal drei Nightgaunts - "Winged beings with horns, claws, a barbed tail, and no face".
Irgendwie hab ich nicht so richtig mein Mojo gefunden bei den Figuren. Diese erhabene Pose wie auf einem Thron finde ich schon gut, aber der Funke wollte nicht so richtig überspringen. Vielleicht dann bei den Flying Polyps, die sind als nächstes dran...
-
Weiter geht die wilde #CthulhuWars -Sause, die blaue Fraktion wächst an. Diesmal drei Nightgaunts - "Winged beings with horns, claws, a barbed tail, and no face".
Irgendwie hab ich nicht so richtig mein Mojo gefunden bei den Figuren. Diese erhabene Pose wie auf einem Thron finde ich schon gut, aber der Funke wollte nicht so richtig überspringen. Vielleicht dann bei den Flying Polyps, die sind als nächstes dran...
Sehen aber cool aus!
Wie hast du die Felsen bemalt? -
Huutini Danke!
Die Felsen ganz "normal' (mach ich so bei allen CW-Bases, wobei ich nicht der große Base-Gestalter bin) - schwarz angemalt, dann dreimal drybrushing mit dunkelgrau, hellgrau und offwhite.
Wie mir erst später aufgefallen ist hat sich noch ein bisschen blau reingeschlichen - hab ich dann als Feature drin gelassen... 😉
-
Die Felsen ganz "normal' (mach ich so bei allen CW-Bases, wobei ich nicht der große Base-Gestalter bin) - schwarz angemalt, dann dreimal drybrushing mit dunkelgrau, hellgrau und offwhite.
Wie mir erst später aufgefallen ist hat sich noch ein bisschen blau reingeschlichen - hab ich dann als Feature drin gelassen... 😉
Danke. Gefällt mir. Meine sehen immer mit nach Zeichentricksteinen aus, weniger nach "Fels" ... Muss ich mal rumexperimentieren.
-
"The orcs could never be considered a seafaring race, but from the day they gazed out across the sea and saw two warring fleets ablaze as cannons roared, their greatest Krudger declared: ‘Yessssssss!’ And so began the orcs’ naval adventure."
Orc Smasher. Bedarf aber noch ganz bisschen Korrektur Naja und Basing wenn wieder die Flotte fertig ist.
-
-
Hatte mich schon gefragt wann einer mehr über die Basen wissen will. Im Grunde sind die sehr einfach @Mutter. Das Beschreiben dauert länger als das machen.
Ich hab zuerst mein Karibisches Farbkonzept (Also Grundieren, Basisfarbe und 3 andere Farben mit Trockenbürsten) drauf, dann Satin Varnish und darauf dann die "Geheimzutat". Hier nimmst du ein Einweg Becher und mixt Soudal Fix All Kraftkleber Kristallklar mit ein wenig Isopropanol [Anzeige] (nicht Wasser - das macht es zäh Gummiartig und ist quasi dann ausgehärtet). Dazu noch Acryl Blau deiner Wahl (2 Tropfen reichen) und rührst mit einem Bastel Eisstile aus Holz um. Mit diesem trägt man dann eine Schicht auf.
Darauf dann nach "Aushärtung" noch eine weitere Schicht unverdünnt und ohne Farbe den Kleber. Hierauf dann das Schiff und ein wenig Kleber um das Schiff unten anbringen. Wenn es anfängt auszuhärten lassen sich Wellen einarbeiten. Und auf die getrocknete Welle Tupft man dann Weiß auf.
Hier findest du das Erklär Video um das mal in Aktion zu sehen. Ist ein sehr cooler Effekt der wirklich keine Arbeit macht. Ich habe es ungeübt gleich drauf ankommen lassen
PS: Meine Farben (das auf dem Blatt Papier )
-
-
Memo an mich selbst:
Nicht wieder 5 Jahre warten bis ich damit anfange, meine Minis mit Lack zu schützen…das wird mich ein paar Wochen kosten
-
Memo an mich selbst:
Nicht wieder 5 Jahre warten bis ich damit anfange, meine Minis mit Lack zu schützen…das wird mich ein paar Wochen kosten
Schöne Sammlung. Magst du mal einen Schnappschuss von den schicken Bäumen links unten posten?
-
Bin gerade unterwegs, aber hier sind noch ein paar ältere Bilder, wo die Bäume zu sehen sind.
-
-
Bin gerade unterwegs, aber hier sind noch ein paar ältere Bilder, wo die Bäume zu sehen sind.
oha seemoosbäumchen sind dabei nice nice
-
Bin gerade unterwegs, aber hier sind noch ein paar ältere Bilder, wo die Bäume zu sehen sind.
Hot! 😍
-
Das erste Fahrzeug von #MastersoftheUniverse_Battleground, die Battle Ram.
Das erste Mal dass ich ein Modell in Einzelteilen bemalen musste um überall gut ranzukommen.
Allerdings habe ich mich die ganze Zeit gefragt: Wer zum Henker ist der Fahrer namens Dawg-O-Tor? Dachte ich kenne mich recht gut aus mit den Masters of the Universe, aber der sagt mir gar nichts.
-
-
-
-
-
Orc Ripper Hulk. Vor paar Minuten fertig geworden
-
Hab mir vor 6 Wochen das Zombicide Invader geholt und es tatsächlich geschafft das Projekt mit 70 Miniaturen komplett zu beenden, ein herrliches Gefühl ☺️
-
Nice! Glückwunsch zum voll bemalten Spiel
-