Habe gerade erst angefangen mit bemalen und benötige eine Lampe.
Ich habe mir diese genommen. https://amzn.eu/d/iGJucy3
Zum klemmen und beleuchtet. Bin soweit zufrieden. Nutze trotzdem noch zusätzlich meine Lesebrille, ja ja das Alter
Habe gerade erst angefangen mit bemalen und benötige eine Lampe.
Ich habe mir diese genommen. https://amzn.eu/d/iGJucy3
Zum klemmen und beleuchtet. Bin soweit zufrieden. Nutze trotzdem noch zusätzlich meine Lesebrille, ja ja das Alter
Nach einer Rezension in einem Video habe ich mir die geholt (Luminos Arbeitsplatzleuchte):
Bin ich auch zufrieden mit, werde mir aber trotzdem den Kickstarter anschauen.
Dss erste Teil fertig.
Ich kann mir nicht vorstellen, dass es da austauschbare Lampen gibt. Die LED(Gehäuse) baut jeder Hersteller anders, da gibt es ja keine Norm.
Und das Gehäuse mit den LEDs ist ja praktisch die ganze Lampe. Da ist anstelle eines Austausches des Lampenschirms ein Neukauf vermutlich wirtschaftlicher.
Ich habe übrigens diese hier im Einsatz:
Neatfi (Neues Modell) XL 2,500 Lumen LED-Tischlampe, EU Stecker, 30W,162 Stück Smd Leds, 56 CM breite Lampe, Dimmbar (Mit Klemme, Weiß) https://amzn.eu/d/6IwOANo
Mit dem Austausch der LED hast du Recht gehabt. Kann anscheinend echt keine Lampe in dem Style.
Danke für den Link zur Neatfi, die hatte ich auch schon gesehen.
Ich habe mir jetzt diese hier bestellt: https://www.amazon.de/gp/product/B0BFJ12XMT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1&tag=wwwunknownsde-21 [Anzeige]
Die gibt es mit Gutschein 10€ günstiger. Bin Anfänger, sollte definitiv reichen.
Wie vor ein paar Seiten genannt reicht für den Wald-und-Wiesen-Maler das folgende
und ähnliche Modelle völlig aus: Tageslichtleuchte Lupenleuchte [Anzeige] (ca. 30.- EUR)
Falls das Tageslicht nicht mehr für die weitere Umgebung ausreicht, geht bei
mir eh das Zimmerlicht an
Zudem - wo packe ich die Lupe hin ? ist wahrscheinlich nächstes Jahr in der V2 Lampe.
Bye-the-way sollte es möglich sein, eine Ring-LED ähnlicher Grösse aufzutreiben,
könnte man diese, mit etwas löten, auch selbst tauschen Ob sich der Aufwand
bei dem Preis allerdings lohnt ?! Meine leuchtet problemlos seit März 2019 und ist
seit März 2020 (Corona) quasi im täglichen Dauereinsatz.
Ich mag RedGrass, aber es braucht nicht alle Ihre Produkte, vor allem die Überteuerten
ohne Mehrwert für den Laien. Ich kann kaum Nachvolziehen wieviel Leute soviel Kohle
auf den Tisch legen, auch schon für frühere ähnliche Lampen-Projekte.
Ich sag mal so, ich kaufe lieber gute Marken-Pinsel.
Der Fokus des von mir geschriebenen bezieht sich rein auf Miniaturen Bemalung !
Bei Red Grass und Scale75 macht es auch keinen Sinn, als Deutscher zu backen. Am Ende gibt es die Produkte hier regulär zum super super very early backer Preis ohne Versandkosten und nachträglichem 19%-Schönrechnungs-Aufschlag im Einzelhandel.
Die drei Blatt Papier, der digital downloadbare Stift-Anspitzer, die digitale Taschenmaus und der analoge Taschenrechner auf spanisch, den es da als non existentes Stretchgoal gibt, macht es auch nicht besser
Eigentlich sollte er bis zum Schluss warten, aber die Miniatur hat mich einfach so gereizt:
Immer noch PA
Ich bin bei der Lampe von RedGrass mit dabei (hatte das Glück einen Super Early Bird zu erwischen), weil diese, im Vergleich zu anderen Lampen, einen erweiterten Farbraum wiedergibt. Gerade im Bereich der Blau- und Rottöne und dem Auftragen eben jener in dünnen Farbschichten ist das nicht zu unterschätzen und DER Mehrwert dieser Lampe.
Das ist als würde ich mit einem TN Panel (Bildschirm) professionelle Bildverarbeitung machen wollen - kaum möglich, aufgrund der fehlenden Farbtreue. Für den Laien ausreichend, aber wenn's besser werden soll braucht es schon einen IPS-Panel.
Und so auch bei der Lampe. Für die meisten wird ne gute 80 Euro Leuchte ausreichen, besonders wenn sie hauptsächlich 1-2 Schichten Speedpaints draufhauen. Aber wer sich pro Miniatur 10-25 Stunden Zeit nimmt und in feinen Farbnuancen arbeitet, dem dürfte diese Lampe eine große Hilfe sein.
Mein Junior macht Druck, er möchte das ich sein Spiel anmale . Also schnell die aktuelle Figur von Black Rose Wars angemalt, dann mit Juniors Spiel angefangen
Endlich Mal wieder eine Figur bemalt.
Als nächstes ATO mit Xpress, da freue ich mich schon enorm drauf. Geprimed mit schwarz, dann grau zenithal, dann weiß drybrush
Ich bin bei der Lampe von RedGrass mit dabei (hatte das Glück einen Super Early Bird zu erwischen), weil diese, im Vergleich zu anderen Lampen, einen erweiterten Farbraum wiedergibt. Gerade im Bereich der Blau- und Rottöne und dem Auftragen eben jener in dünnen Farbschichten ist das nicht zu unterschätzen und DER Mehrwert dieser Lampe.
Das ist als würde ich mit einem TN Panel (Bildschirm) professionelle Bildverarbeitung machen wollen - kaum möglich, aufgrund der fehlenden Farbtreue. Für den Laien ausreichend, aber wenn's besser werden soll braucht es schon einen IPS-Panel.
Und so auch bei der Lampe. Für die meisten wird ne gute 80 Euro Leuchte ausreichen, besonders wenn sie hauptsächlich 1-2 Schichten Speedpaints draufhauen. Aber wer sich pro Miniatur 10-25 Stunden Zeit nimmt und in feinen Farbnuancen arbeitet, dem dürfte diese Lampe eine große Hilfe sein.
Sorastro hat in seinem letzten Post etwas Interessantes dazu geschrieben.
Er bekam eine Lampe geschickt, hat aber keine Zeit ein offizielles Review darüber zu machen. Für ihn waren die 5000k Lichttemperatur ein No-Go, was er anhand von Screenshots kurz dargelegt hat. Diese Farbtemperatur hat einen für ihn klar ersichtlichen Gelbstich (Sepia) und auch, wenn sie seiner Meinung nach gut verarbeitet ist, würde sie ihm die Arbeit eher erschweren. Er meinte auch, dass er nicht wisse, für wen die Lampe gemacht sein soll, da für Anfänger 200 Euro einfach zu viel sind, Profis jedoch einfach etwas besseres als diese Lampe bräuchten.
Ich selbst benutze eine Tri-Tube mit 6400k, da wäre die Differenz auch einfach zu extrem für mich.
Ich arbeite zur Zeit immer noch am "Battle of the five Armies" Spiel. Hier die Stadt Thal (Ruinen von Thal). Der Token ist der Falsche, der Richtige muss noch gedruckt werden.
Das ganze Teil ist ziemlich groß und mit LED Beleuchtung. Platz gibts auch für bis zu 9 Figuren. (Armeelimit ist 5 + Rest Helden + Adler z.B.)
Die Grunts von Deep Rock Galactic sind fertig.
Eignen sich Prima zum herumexperimentieren. Jetzt kann ich die Viecher aber nicht mehr sehen
Habe 8 mit Speedpaints bemalt, den Rest klassisch allerdings dabei mich am glazen probiert bei mehreren Grunts.
An einem habe ich versucht einen OSL effekt (leuchtender "Riss" im Panzer) zu zaubern
So bin im Urlaub auch bei ATO weitergekommen. Hoffe werde in den nächsten 2-3 Wochen fertig, dass ich auch nochmal weiterspielen kann.
Temenos und Nyx müssen noch gewasht werden. Auf Nyx bin ich recht stolz, gefällt mir sehr gut, hatte auch einiges an Zeit für sie investiert.
Nachdem ich irgendwann in der Zeit der Altvorderen (vermutlich so mit 14-16 Jahren) mal Warhammer gespielt habe, habe ich dem Tabletop seitdem keine Beachtung mehr geschenkt.
Jetzt ist aktuell (und da bin ich nicht ganz unschuldig dran) im Freundeskreis ein Infinity-Hypetrain eingefahren, also versuche ich mal wieder mein Glück mit dem Maßband.
Habe mich für die Military Orders entschieden und führe nun demnächst wütende Kreuzritter in Cyberrüstung in zum Scheitern verurteilte SpecOps-Missionen.
Bin beim Farbschema nahe am offiziellen Box-Art geblieben, allerdings etwas entsättiger und schmutziger.
Ziel war ein Standard wo ich keine Ewigkeiten pro Modell brauche, es aber trotzdem irgendwie nett aussieht. Die ersten Minis habe ich mittlerweile durch, die nächsten stehen grundiert bereit, bald kann also gespielt werden^^
Die Ankh Minis haben mir keine Ruhe gelassen, nun bin ich voll der ägyptischen Mythologie verfallen, ist aber nicht einfach zu folgen.
Dank dem Tipp von Claeuschen sind die Fotos (wie ich finde) deutlich besser geworden, vielen Dank dafür!
Bei mir wurde gestern und heute wieder eine selbst gedruckte Figur bemalt. Dank Contrast auch wirklich eine relativ flotte Nummer, bisschen Drybrush hier und da, aber so macht es einfach sehr Spaß.
Bei mir wurde gestern und heute wieder eine selbst gedruckte Figur bemalt. Dank Contrast auch wirklich eine relativ flotte Nummer, bisschen Drybrush hier und da, aber so macht es einfach sehr Spaß.
Ist das ein Resin Drucker den du hast? Die Weiße Figur sieht so glatt aus, auf der anderen Seite sieht man teilweise Stufen.
Ich bin verwirrt!
Ich bin noch im Infinity-Wahn und schiebe nochmal ein paar Bilder hinterher. Das Modell von Jeanne d'Arc finde ich ziemlich geil, die seltsam knapp bekleidete Dame im Schlüppi ist eher ein Kuriosum der Serie, aber sie ist nunmal in meiner Fraktionsliste 🤭
Sehr schöne Infinity-Modelle, spiele selbst mit Begeisterung! Die Tech Bee ist ein ziemlich cooles Modell, unterstreicht den etwas Anime/Manga-lastigen Stil von Infinity. Ich bin damals wegen des entsprechenden Boxarts von Operation Icestorm eingestiegen, hatte vorher nie etwas von Infinity gehört.
Bei mir wurde gestern und heute wieder eine selbst gedruckte Figur bemalt. Dank Contrast auch wirklich eine relativ flotte Nummer, bisschen Drybrush hier und da, aber so macht es einfach sehr Spaß.
Ist das ein Resin Drucker den du hast? Die Weiße Figur sieht so glatt aus, auf der anderen Seite sieht man teilweise Stufen.
Ich bin verwirrt!
Ja Resin. Eve ist mit glänzendem Lack bestrichen worden, deshalb glänzt sie mehr als der Rest.
Sehr schöne Infinity-Modelle, spiele selbst mit Begeisterung! Die Tech Bee ist ein ziemlich cooles Modell, unterstreicht den etwas Anime/Manga-lastigen Stil von Infinity. Ich bin damals wegen des entsprechenden Boxarts von Operation Icestorm eingestiegen, hatte vorher nie etwas von Infinity gehört.
Danke! Die Tech-Bee ist halt vom Sculpt her schon sichtbar in die Jahre gekommen, aber ich finde sie auch okay. Unter den Infinity-Modellen (wo es einfach echt viele coole gibt) belegt sie dann aber bei mir keinen hohen Platz in der Rangliste.
Werde jetzt am Donnerstag mein erstes 150 Punkte-Spiel machen und dann mal sehen, wohin die Reise geht. ☺️
Weiter geht's mit den Goo Bombern, den Glyphid Slashers und den Glyphid menaces aus Deep Rock Galactic.
Leider hat mein Matte varnish zum sprühen von Army painter so bläschen hinterlassen. Bekommt man das irgendwie gefixt ?
Sieht krass aus. Schlacht der fünf Heere?
Schlacht der fünf Heere?
Steht in Klammer dahinter, auch in dem von dir zitierten Teil.
Schlacht der fünf Heere?
Steht in Klammer dahinter, auch in dem von dir zitierten Teil.
Sowas passiert mir auch immer mal
Ja Schlacht der fünf Heere. Ein komplettes Foto kommt dann auch mal noch. Muss noch das Camp fertig machen dann ist erstmal gut. War ein kostenintensives Projekt.
Schlacht der fünf Heere?
Steht in Klammer dahinter, auch in dem von dir zitierten Teil.
Tut mir sehr Leid, habe ich überlesen. Soll nie wieder vorkommen.