Hey zusammen, gibt es dazu eine Bezugsquelle, außer Kickstarter.
Ansonsten hab ich eigentlich genug englischen Kram, gibt es auch
gute deutsche Bücher zu dem Thema ?
Hey zusammen, gibt es dazu eine Bezugsquelle, außer Kickstarter.
Ansonsten hab ich eigentlich genug englischen Kram, gibt es auch
gute deutsche Bücher zu dem Thema ?
Hey zusammen, gibt es dazu eine Bezugsquelle, außer Kickstarter.
Ansonsten hab ich eigentlich genug englischen Kram, gibt es auch
gute deutsche Bücher zu dem Thema ?
Beide Titel waren vorhin noch bei Fantasywelt vorrätig…und dazu preislich günstiger als anderswo
Danke! ich war wohl etwas blind bei der Suche
Dennoch werfe cih nochmal meine 2. Frage in die Runde,
gibt es auch gute deutschsprachige Literatur ?
Moin, das wird von GW vermutlich eine Sororitas Character-base sein.
Hab mal ein erstes Mal mit meiner Contrast Farbpalette experimentiert. 2.5h alles in allem, bin zufrieden. #FeedTheKraken
Bei mir liefen in den letzten Monaten beide 3D-Drucker auf Hochturen. Zum einen sollte es Gelände für Frostgrave/Herr der Ringe Tabletop geben, zum anderen habe ich einen Frostgiganten gefunden, der mir echt gefallen hat. In den letzten Wochen war es dann soweit und ich habe die Gebäude sowie gestern den Frostgiganten fertiggemalt.
Hauptsächlich wurde die "allseits bekannte" Slapchop-Methode angewandt, mit ein paar Abwandlungen hier und da sowie Highlights, Drybrushing etc.
Insbesondere das Mauerwerk gefällt mir ziemlich gut, und es war sehr einfach zu malen.
Beim Frostgiganten könnte ich vermutlich noch Stunden investieren (Pelz Drybrushen, Gold mehr definieren, Highlights auf der Haut setzen etc.), aber hier warten noch ein paar andere Figuren auf mich und es muss auch mal Schluss sein.
Ich habe zwischendrin mal ein kleineres Projekt mit "Feed the Kraken" fertig gestellt.
Hier und da aber doch aufwändiger, als gedacht.
Und jetzt die Frage, die alle beschäftigt: lässt sich das Steuerrad noch drehen?
Ja. Läuft butterweich.
Ja. Läuft butterweich.
Hattest du es demontiert und später wieder drauf gesteckt (geht das überhaupt?) oder montiert bemalt?
Ja. Läuft butterweich.
Hattest du es demontiert und später wieder drauf gesteckt (geht das überhaupt?) oder montiert bemalt?
Ja. Einfach beherzt gezogen. Ist nur ein Plastikstift der sich danach wieder reindrücken lässt.
Sind die Sparmax Airbrushsets empfehlenswert? Ginge primär ums Grundieren (+Zenithal).
Die sagen mir leider nichts.
Ich habe im Prinzip das hier, nur aufgrund Einzelkauf nach und nach wesentlich teurer erworben. 😅
Ich kann Dir als Tipp nur sagen, beim Kompressor auf jeden Fall einen nehmen mit Tank und Abschaltautomatik.
Ich habe lange einen weiter benutzt, den ich von meinem Vater übernommen hatte, der damals recht teuer war (~600DM), aber der hat sich nicht mehr abgeschaltet und lief deswegen bei längeren Grundiersessions ziemlich heiß.
AndreasWtal schönes Gold, was hast du da verwendet?
AndreasWtal schönes Gold, was hast du da verwendet?
Mit Wraithbone grundiert und einiges ein zweites Mal mit Silber bemalt.
Dann Speedpaint
Ich würde annehmen helles Silber unter gelben Speed Paint.
Bei all den toll bemalten Minis hier packt mich fast die Lust mein WH40K Zeug mal wieder rauszuholen und abzustauben.
Wobei nach gut 20 Jahren wahrscheinlich nicht mal mehr die Pinsel zu gebrauchen sind.
AndreasWtal schönes Gold, was hast du da verwendet?
Mit Wraithbone grundiert und einiges ein zweites Mal mit Silber bemalt.
Dann Speedpaint
Ich würde annehmen helles Silber unter gelben Speed Paint.
Ganz genau.
Das ist Vallejo Model Color Silver 70.997 als Untergrund und darauf Armypainter Speedpaint Zealot Yellow
Bei all den toll bemalten Minis hier packt mich fast die Lust mein WH40K Zeug mal wieder rauszuholen und abzustauben.
Wobei nach gut 20 Jahren wahrscheinlich nicht mal mehr die Pinsel zu gebrauchen sind.
Da hilft nur ne neue Armee aufbauen
Nachdem meine Minis alle 2007 bei einem Hochwasser draufgegangen sind (lagen da aber schon 10 Jahre nur rum), haben wir letztes Jahr wieder angefangen. Malen hat mir damals eigentlich nicht so Spass gemacht. Das ist jetzt anders. Es lohnt sich!
Bei all den toll bemalten Minis hier packt mich fast die Lust mein WH40K Zeug mal wieder rauszuholen und abzustauben.
Wobei nach gut 20 Jahren wahrscheinlich nicht mal mehr die Pinsel zu gebrauchen sind.
Da hilft nur ne neue Armee aufbauen
Nachdem meine Minis alle 2007 bei einem Hochwasser draufgegangen sind (lagen da aber schon 10 Jahre nur rum), haben wir letztes Jahr wieder angefangen. Malen hat mir damals eigentlich nicht so Spass gemacht. Das ist jetzt anders. Es lohnt sich!
Nun ja, der Bauch hat definitiv schon entschieden neue Farben zu besorgen und ein paar der Mini's für meine Brettspiele anzugehen. Dauert vermutlich nur noch 1-2 Tage damit es auch im Kopf ankommt und der auch damit klarkommt.
Um wirklich auch wieder sinnvoll mit WH40K zu starten fehlt inzwischen dann doch die Zeit und Lust. Da haben sich auch die Lebensumstände, nicht nur meine sondern aller die damals so dabei waren in unserer Gruppe geändert.
Da hilft nur ne neue Armee aufbauen
Nachdem meine Minis alle 2007 bei einem Hochwasser draufgegangen sind (lagen da aber schon 10 Jahre nur rum), haben wir letztes Jahr wieder angefangen. Malen hat mir damals eigentlich nicht so Spass gemacht. Das ist jetzt anders. Es lohnt sich!Nun ja, der Bauch hat definitiv schon entschieden neue Farben zu besorgen und ein paar der Mini's für meine Brettspiele anzugehen. Dauert vermutlich nur noch 1-2 Tage damit es auch im Kopf ankommt und der auch damit klarkommt.
Um wirklich auch wieder sinnvoll mit WH40K zu starten fehlt inzwischen dann doch die Zeit und Lust. Da haben sich auch die Lebensumstände, nicht nur meine sondern aller die damals so dabei waren in unserer Gruppe geändert.
Zeit ist definitiv ein Faktor. Ich hatte das Glück, dass die Leute von früher auch wieder Lust bekamen. Ich wünsche dir in jedem Fall viel Freude beim Bemalen!
Alles anzeigenDie 2. Ankh Gottheit ist fertig: Amun.
Mit Wraithbone grundiert und einiges ein zweites Mal mit Silber bemalt.
Dann Speedpaint außer der Rückseite des Umhangs, dieser ist der Versuch eines Basepaints + Drybrush.
Zum Schluss Matt Spraylack
Mir gefällt er!
Jetzt mach mal langsam, Du setzt mich mit meinen wartenden Göttern unter Druck!!
Sieht auch sehr gut aus und sollte mich wirklich motivieren, meine Ankh-Minis endlich weiter zu bemalen.
Kurze Frage zu Resin bemalen:
Kurz in Seifenwasser abwaschen und mit Sekundenkleber kleben. War das alles?
Primer und so weiter genau wie bei Plastik?
Habe mir aufgrund von Bock auf Römer nen SPQR Starter gegönnt.
Seifenwasser? Resin sollte in Isopropanol gewaschen und nach dem Trocknen ausgehärtet werden. Du kannst es danach "ganz normal" weiterverarbeiten.
SPQR ganz normal "behandeln", das meiste sollte eigentlich Plastik sein.
Nur Helden und Bogis sind aus "Warlord Resin".
Einfach mal testen und statt Sekundenkleber besser Plastikleber verwenden.
Ich kann mir kaum vorstellen, das Warlord die Produktion der 2.0er Version
schon angepasst hat bzw. überhaupt umstellt. Denn auch in der Beschreibung
des neuen "Caesar's Gallic Wars - Hail Caesar starter set" steht bei exakt
gleichen Figuren nur Plastik in der Beschreibung.
Aus der Beschreibung von "Warlord Resin"
- Crisp looking models with sharp details making each sculpt look fantastic
- Minimal mould lines
- Models made of Warlord Resin are easily converted, Cut/Scrape/File to your heart’s content
- No need for priming, you are able to paint straight onto the model if you want
- The material is not as brittle as other resins so guns/swords etc will not readily snap.
Auf dieses "no need for priming" würde ich mich bei Resin-Modellen nicht verlassen: ich hatte mal versucht meine Shadows of Brimstone-Resin-Charaktere ohne Primer zu bemalen, da konnteste die Farbe (nach dem Trocknen) direkt mit dem Daumen wieder abwischen.
Bei selbstgedruckten Resinfiguren (nach ordnungsgemäßer Reinigung und anschließender Härtung) grundiere ich ganz "normal".
Danke euch für die schnelle Antworten!
Grundsätzlich vollkommen richtig. Die Kits für die Legionäre und die gallischen Krieger sind aus Plastik.
Helden, zusätzliche Schilder für die Krieger und einsatzgallische Bogenschützen sind aus resin. Hatte irgendwie im Kopf, man müsse da irgendwas abwaschen…
Ich wasche Resin auch vorsichtshalber immer ab. Passiert sonst oft das da noch irgendwelches Trennmittel oder sowas dran ist und Grundierung + Farbe nicht hält. Ganz schlimm war das früher immer bei Forgeworld sachen. Die musste man teilweise 5 mal mit Spüli und Zahnbürste schrubben bis man sie grundieren konnte.
Scheint heute auch nicht anders zu sein z.B. hier zu sehen:
Genau wie dort zu sehen mache ich es auch immer mit Resin Modellen.
Weiß nicht ob ihr bisher alle soviel Glück mit eurem Resin hattet? Ich hab eigentlcih nie Lust das auszuprobieren nur um dann die halb grundierte Mini nochmal schrubben zu müssen, oder noch schlimmer erst beim malen zu merken das die Farbe an einigen Stellen abperlt.
1x zur Sicherheit im Seifenwasser schrubben schadet nicht. Ärgerlicher ist wenn dann doch ein paar Stellen nicht gewillt sind den Primer gleich zu akzeptieren.
Alles anzeigenDanke euch!
Noch ne followup Frage:
Wie macht man die Base am Schnellsten?
Ich vermute da kommt man nicht um Spachteln herum?
Was nehme ich da, wenn ich nachher Wiese drauf flocken will?
Kleber und Sand vermischen. Z.B Bastelkleber. Auch größere Steine gehen. Danach anmalen und mit Graß bestücken ja.
Gibt aber auch Spachtelmasse brauchst ja für alle Minis nicht viel.
Was auch ginge aber mehr ins Geld geht: Greenstuff drumherum packen und modellieren.
1a) Resin-Minis: erstmal Bastelkleber mit ein paar Tropfen Sekundenkleber mischen und Figur auf der Base befestigen.
1b) Plastik-Minis: einfach mit Plastikkleber drauf "schweissen".
-> Spachteln ist hierbei nicht nötig, das wird ja später alles beim Basing überdeckt.
2) Grundieren.
3) Bemalen und optional lackieren (Pinsel-Lack)
4) Basen und optional jetzt lackieren (Spraylack)
Ob nötig oder nicht, ich habe alle Minis mit Seifenwasser gewaschen und dann grundiert,
ohne Unterschied ob Plastik oder Resin - absolut kein Problem mit dem Warlord Resin.
Bei TTCombat hatte ich dagegen tatsächlich arge Probleme, Bei Warlord alles easy going.
Hier noch ein paar Beispiele zur Starter-Box:
Gallier Version 2:
Ymper sau Schick!
Du wohnst ja auch gar nicht so weit weg von Mannheim 😂
Danke für die Tipps!
Basen, bis aufs Grass ginge auch vor dem bemalen, oder? Oder ist primer auf Sand/Kleber doof?
Projekt Townsfolk Tussle ist abgeschlossen. Schön dass bald n neuer KS startet, sonst wird mir noch langweilig
Ymper sau Schick!
Du wohnst ja auch gar nicht so weit weg von Mannheim 😂
Danke für die Tipps!
Basen, bis aufs Grass ginge auch vor dem bemalen, oder? Oder ist primer auf Sand/Kleber doof?
Nope - die Entfernung ist machbar Kannst mir ja mal ne PN schicken.
Bei den Bases, ist die Antwort ein ganz klares Jaein. Kommt auf Material und das Ergebnis an,
das du erzielen willst. Ganz "normalen" Sand sollte man eh bemalen, d.h. dann auch mitgrundieren.
Ich nehme in der Regel fertig preparierte Materialien, um zeit zu sparen, kostet halt oft
etwas mehr.