Mit Bremsflüssigkeit funktioniert entlacken auch, aber Vorsicht: Ätzend! Immer mit Handschuhen arbeiten und alles gründlich abspülen. Die Figuren in ein Gefäß (Glas oder Metall) mit der Flüssigkeit legen und nach 2-3 Stunden mal probieren, ob die alte Lackpampe sich abziehen lässt. Andernfalls weiter einwirken lassen und immer wieder mal testen...
Und was habt ihr so bemalt...?
-
[Tom] -
23. August 2018 um 10:13 -
Unerledigt
-
-
Richtig vermutet. Es war Email-Farbe.
Ich probiere eure Vorschläge mal aus. Klingt aber nach viel Arbeit. Habe das Grundspiel + alle Erweiterungen doppelt.
-
Richtig vermutet. Es war Email-Farbe.
Ich probiere eure Vorschläge mal aus. Klingt aber nach viel Arbeit. Habe das Grundspiel + alle Erweiterungen doppelt.
Lass mich wissen, was draus geworden ist, ich habe dasselbe Problem wie du ... Schöne 80er-Revell-Farben in vier Grundtönen aufgeklatscht, und keine Ahnung, wie man die wieder abkriegen soll ...
-
-
-
So, und hier die vier neuen Generäle für "Defenders of the Realm". Ja, das sind eigentlich Figuren von HeroQuest, die ich hier und da an die Defenders-Generäle angepasst habe. So passen sie zum Spiel und kommen wieder häufiger auf den Tisch.
Ich habe mich mit den originalen General-Figuren von Defenders of the Realm nicht anfreunden können, besonders da bei meinem (gebraucht gekauften) Spiel der Orc-General eine grüne Kopie des Untoten-Generals ist und ich den Drachen für viel zu groß empfinde. Der Dämon (war original ein Fimir) hat Flügel bekommen, der Untote (einst der Chaos Warlock) ein Schwert und der Orc (ein Chaos Worrior) ein Orc-Gesicht. Bei dem Dachen (zuvor der Garoyle) habe ich den Helmschmuck in Hörner geändert und die Hosenträger im Rücken entfernt.
-
-
-
Wald und Wiesenfee (Gewitterziege)
unknowns.de/attachment/38355/ -
-
-
Kleine Frage zwischendrin:
Wenn ich „sunbedröppelte“ Minis habe, die ich gerne noch richtig anmalen will, muss ich die zuvor auch nochmals grundieren, oder kann ich da einfach direkt drauf losmalen?
Besten Dank
-
Kleine Frage zwischendrin:
Wenn ich „sunbedröppelte“ Minis habe, die ich gerne noch richtig anmalen will, muss ich die zuvor auch nochmals grundieren, oder kann ich da einfach direkt drauf losmalen?
Besten Dank
Ich habe dabei sehr unterschiedliche Erfahrungen gesammelt. Habe mein sungedroptes Lords of Hellas bemalt.
Mit normalen Farben auf dem Sundrop, ging schon ganz ok, war akzeptabel, an wenigen Stellen hat die Farbe nicht optimal gehalten und es musste ein paar mal öfter drüber gegangen werden.
Bei Contrast Farben, sollte man unbedingt neu Grundieren, die Farben haben fast gar nicht richtig gehalten.
Habe mich aber danach entschlossen, alle Miniaturen vor dem Bemalen neu zu Grundieren.
Das Ergebnis war schon deutlich besser und das malen hat auch so mehr Spaß gemacht.
Fazit: Ja nochmal Grundieren
-
Kleine Frage zwischendrin:
Wenn ich „sunbedröppelte“ Minis habe, die ich gerne noch richtig anmalen will, muss ich die zuvor auch nochmals grundieren, oder kann ich da einfach direkt drauf losmalen?
Besten Dank
Befühle die Figuren mit den Fingern. Wenn sie sich etwas rau anfühlen sollte direktes bemalen funktionieren. Sind sie sehr glatt, mußt du grundieren.
Vorher waschen würde ich die Figuren immer, Staub und Fett müßen runter.
-
Kleine Frage zwischendrin:
Wenn ich „sunbedröppelte“ Minis habe, die ich gerne noch richtig anmalen will, muss ich die zuvor auch nochmals grundieren, oder kann ich da einfach direkt drauf losmalen?
Besten Dank
Befühle die Figuren mit den Fingern. Wenn sie sich etwas rau anfühlen sollte direktes bemalen funktionieren. Sind sie sehr glatt, mußt du grundieren.
Vorher waschen würde ich die Figuren immer, Staub und Fett müßen runter.
Wobei man immer in Betracht ziehen muss, dass beim mehrmaligen Bemalen von Miniaturen es zu Detailverlusten kommen könnte, da 2x Grundierung und 2x Farbe drauf gemacht wurden.
-
Befühle die Figuren mit den Fingern. Wenn sie sich etwas rau anfühlen sollte direktes bemalen funktionieren. Sind sie sehr glatt, mußt du grundieren.
Vorher waschen würde ich die Figuren immer, Staub und Fett müßen runter.
Wobei man immer in Betracht ziehen muss, dass beim mehrmaligen Bemalen von Miniaturen es zu Detailverlusten kommen könnte, da 2x Grundierung und 2x Farbe drauf gemacht wurden.
Vor allem wenn Quickshade zum Einsatz kam, würde ich auch eher zum Strippen der Figuren raten.
-
Unsere kleine Drachenfamilie
Ich hoffe das mit dem Zähmen ist leicht gemacht
-
Ein paar Minis von Project Elite.
-
#MunchkinDungeon nimmt langsam Gestalt an.
-
-
weiterhin echt schöne Figuren die hier bemalt worden sind - Toll !!!
Ich bin gerade dabei meine gedruckten Gebäude anzumalen... so langsam wächst das "Dorf" ...
Die Gebäude sind allerdings eher für 15mm Tabletop gedacht als für Brettspiele.
und der Drache aus Time Legends - Joan of Arc habe ich angefangen... für die Gebäude aber erstmal wieder beiseite gestellt... der wird noch einige Zeit in Anspruch nehmen. -
Und noch Krepitus (aus dem Herr der Träume). Damit ist auch ein Spiel endlich fertig.
Meine Tochter (fast 4) wollte auch was Malen. Um das Interesse nicht im Keim zu ersticken durfte sie den Roboter bemalen.
Das ist ganz gut geworden. Ich werde noch an den weißen Stellen Metallfarbe anbringen, etwas Weathering und die Linse, aber dann bleibt der so. Dann erkennt sie den bestimmt auch wieder, wenn wir das iiiiirgendwann spielen.
-
-
Habe mal den Statuen aus Super Fantasy Brawl einen Steinlook verpasst :
-
-
Und dann ist es auch noch so ein gutes Spiel!
Sieht gut aus.
-
Ich bin gerade dabei meine gedruckten Gebäude anzumalen...
Sapperlot! Sehen die Häuschen gut aus.
Womit druckst denn?
Oder lässte er drucken?
-
Ich bin gerade dabei meine gedruckten Gebäude anzumalen...
Sapperlot! Sehen die Häuschen gut aus.
Womit druckst denn?
Oder lässte er drucken?
aktuell mit einen Artillery Genius für 220,- - bin aktuell seht begeistert von diesem Drucker
stehen tun hier noch:ein Anycubic Photon SE (inkl. einer Wash & Cure Station) - eher etwas für Figuren
ein Prusa MK3 den ich zu einem MK3S "upgegradet" habe ... da ich nicht so der techn. Bastler bin liefert der Drucker gerade keine so guten Ergebnisse bei mir... keine Ahnung woran es liegt, wenn ich Zeit und Lust habe muss ich mich mal damit beschäftigen... obwohl er aus Platzgründen dann doch eher verkauft wird.. Der Prusa hat übrigens einen Großteil der Gebäude gedruckt
-
ein Prusa MK3
Prusa: i3 MK3S ist Testsieger bei Stiftung Warentest (aktuelles Heft)
-
-
SOS!!!
Ich brauche Hilfe. Ansonsten werde ich mich wahrscheinlich ins Bett weinen.
Heute habe ich die Nemesis Königin fertiggestellt. Bis zum Lackieren war ich sehr zufrieden, da ich für meine Verhältnisse sehr zufrieden war. Dann kam der matte Varnish. Frosting. Ich wusste noch, dass [Tom] geraten hatte erneut zu sprühen. Also Dose ins warme Wasserbad und nochmal besprüht. Nach dem sprühen direkt rein in den Flur gestellt, wo es 24 Grad hat. Und dann:
Gleiches Ergebnis, dafür nun dick Lack drauf.
Wie kann ich da jetzt noch was beheben?
Gelesen hatte ich von Föhnen, neu mit verdünntem Munitorum bepinseln oder irgendwas mit Alkohol.
Wie gesagt, ich war wirklich sehr zufrieden und bin jetzt ziemlich geknickt. An so einem Mini sitze ich als langsamer Maler und Anfänger zwei halbe Tage. Dann passiert sowas. Am liebsten würde ich gerade alle meine Farben und Pinsel verkaufen.
-
irgendwas mit Alkohol.
Joh, gönn dir ruhig was auf den Schreck ....
-
Mir müsste man erstmal erklären, was da bei fjaellraeven überhaupt misslungen sein soll - ich find es toll. Also wären meine Malerfolge so geworden, tät ich heute noch meinen Pinsel schwingen. -
Meine Tochter (5) hat ein My little Pony Figürchen bekommen und mein Spielezimmer unter Glitter gesetzt...
Aber scheint ihr Spaß zu machen - Da hab ich heute mal die Gelegenheit beim Schopfe gepackt und mit ihr meine verhunzten und wieder entfärbten Blood Rage Minis erneut mit Contrast bemalt - Testlauf: Schlimmer können die eh nicht mehr werden...Leider hab ich nur blau mit dem GW Contrast Spray neu grundiert, rot und grün waren noch entfärbt und deswegen leuchten die nicht so schön...Egal.
Ergebnis: Hab sie die Woche beim Kindergarten schon mal krank abgemeldet und bei Wasser und Brot ins Spielezimmer eingesperrt...soll die mal was tun fürs Dach überm Kopf für sich und ihre Barbies...Rund 1000-2000 Minis liegen noch vor Ihr
-
Wie kann ich da jetzt noch was beheben?
Nimm mal ein Wattestäbchen und befeuchte es mit (Oliven-)Öl. Nicht tränken, nur befeuchten. Geh damit an die Frosting Stellen ran und probier es aus. Hat mir schon gut geholfen. Das Öl braucht nur lang zum trocknen. Viel Glück.
-
Wie kann ich da jetzt noch was beheben?
Nimm mal ein Wattestäbchen und befeuchte es mit (Oliven-)Öl. Nicht tränken, nur befeuchten. Geh damit an die Frosting Stellen ran und probier es aus. Hat mir schon gut geholfen. Das Öl braucht nur lang zum trocknen. Viel Glück.
Danke, Danke, Danke!!!
Ich glaube ich bin einen Großteil losgeworden und auch wenn jetzt alles glänzt wie eine Speckschwarte, schaut es schon viel besser aus.
Und Mucki: einfach wieder probieren im Zweifel. Das sind nach Cry Havoc meine ersten Minis. Dazwischen waren auch Monate Pause und ich lerne gerade während meiner ersten Gehversuche.
Es dauert nur einfach lange bei mir, weil ich nicht so begabt bin oder einfach langsam. Im Gegensatz zu manch anderen Posts hier ist das bei mir auch auf dem Niveau von Harrys Tochter.
Übrigens: Danke!
-
-
Der Speck trocknet weg. Dauert nur.
-
Der Speck trocknet weg. Dauert nur.
Hm, ich warte schon ewig und mit meinem Speck tut sich nichts
-
Klaus_Knechtskern warum hattest du dich mit Olivenöl eingerieben?
-