Mir fehlt da ein Finger-Rest wie beim Rathcore.
https://www.pk-pro.de/Rathcore-Minia…d-Handgriffe-V3
Habe mehrere davon und liebe die einfach 😅
So einen V3 hab ich hier und komme irgendwie nicht klar damit. Keine Ahnung woran das liegt.
Mir fehlt da ein Finger-Rest wie beim Rathcore.
https://www.pk-pro.de/Rathcore-Minia…d-Handgriffe-V3
Habe mehrere davon und liebe die einfach 😅
So einen V3 hab ich hier und komme irgendwie nicht klar damit. Keine Ahnung woran das liegt.
Mal als Gegenpol zum Konsum; ich nehme, was gerade da ist. Pillendosen, Farbflaschen, Korken Holzklötze. Alles mit Pattafix fixiert.
Reicht für meinen Bedarf komplett aus und gab noch nie Probleme.
Was auch super praktisch ist, dass man bei Bedarf (Batchpainting) einfach eins dazustellt und nicht erst wieder bestellen und warten muss und auch so die nächste Ausrede schafft, erneut zu prokrastrinieren und Geld auszugeben
Ja Pillendosen und Haar-Puderdosen, in der richtigen Grösse sind ansich auch
sehr gut, aber gerade bei grösseren Mengen und Feinheiten ist die Rotations-
möglichkeit einfach Gold wert.
Hier muß man einfach seinen Bedarf und Ziele mit berücksichtigen. Würde ich
nur gelegentlich bemalen, dann würde die günstige Variante vollkommen ausreichen,
bei den paar hundert Minis die ich im Jahr durchziehe, neigt man dann doch
irgendwann zu professionelleren Handwerkszeug.
Mir fehlt da ein Finger-Rest wie beim Rathcore.
https://www.pk-pro.de/Rathcore-Minia…d-Handgriffe-V3
Habe mehrere davon und liebe die einfach 😅
So einen V3 hab ich hier und komme irgendwie nicht klar damit. Keine Ahnung woran das liegt.
Schade, aber ich schätze es kann halt nicht bei jedem passen 🤷🏼♂️
Die klassischen Eigenbauvarianten wie von r3h0k3 erwähnt benutze ich bei kleineren Projekten natürlich auch, aber wenn mir ein Modell wichtig ist stelle ich es auf den Malgriff, den Unterschied merke ich schon.
Ja, hatte mir den von meiner Frau vornehm paar Jahren zu Weihnachten gewünscht und mich Mega drüber gefreut. Aber irgendwie bleiben die Minis immer auf den Plastikshotgläsern, auf denen ich sie grundiere.
Evtl. Muss ich mich einfach mal dazu „zwingen“ die dann auf den V3 umzuziehen.
Ich bin mit dem "RGG 360° Painting Handle" sehr zufrieden, läuft übrigens auch noch knapp 3 Tage
und ist auch direkt (ohne die Neuerungen) im Fachhandel zu beziehen.
Links: fantasywelt , redgrasscreative, aktueller KS
Ist ein richtig gutes Ding! Benutze ich seit einiger Zeit auch und empfehle ihn sooft ich kann.
Dann schau ich mir den mal an.
#CthulhuWars Der Partybus fährt weiter nach R'lyeh.
Ich bin ein wenig Kultisten-müde. Wieder mal die gleichen sechs Kultisten angemalt, diesmal für Team Rot .
Immerhin lockt als nächstes Shub-Niggurath als Big Boy und somit der Abschluss der dritten Fraktion! Bei dem Tempo bin ich vielleicht durch, bis mein Return to Planet Apocalypse ausgeliefert wird.
Ich bin mit dem "RGG 360° Painting Handle" sehr zufrieden, läuft übrigens auch noch knapp 3 Tage
und ist auch direkt (ohne die Neuerungen) im Fachhandel zu beziehen.
Links: fantasywelt , redgrasscreative, aktueller KS
Ist ein richtig gutes Ding! Benutze ich seit einiger Zeit auch und empfehle ihn sooft ich kann.
Aufgrund dieses Threads hab ich mir den auch besorgt und ich bin schwer angetan! Gutes Ding. Muss mich erst einmal daran gewöhnen, dass ich die Figuren draufpappen muss ... aber es ist einfach angenehm, die Minis drehen zu können.
EDIT:
Ich hab zuletzt die furchtbar hässlichen Zombies aus Cursed City von ihren Bases geknippst und ohne Umweg in die Aschentonne gepfeffert. Und dann hab ich schön klassische Warhammer Fantasy Zombies draufgeklebt und angemalt. Ich bin so glücklich damit ...
#CthulhuWars Manchmal geht es schneller als man denkt... Ladies and gents, Shub-Niggurath! The Black Goat of the Woods With a Thousand Young!
Fraktion rot meldet somit Vollzug. Analog zu den bisherigen Figuren von Team Rot sollte es diesen leichten "I'm on fire"-Vibe rüberbringen. Dafür hab ich bei Shub mittels schwarzen Spritzern ein "Guten Tag, ich komme gerade frisch aus dem Feuer" probiert. Hoffe, es kommt einigermaßen rüber auf den Bildern...
Zum Abschluss noch die glückliche Familie:
Sehr schöne Verläufe, die Dickerchen sehen klasse aus 👍🏻
Ist ein richtig gutes Ding! Benutze ich seit einiger Zeit auch und empfehle ihn sooft ich kann.
Aufgrund dieses Threads hab ich mir den auch besorgt und ich bin schwer angetan! Gutes Ding. Muss mich erst einmal daran gewöhnen, dass ich die Figuren draufpappen muss ... aber es ist einfach angenehm, die Minis drehen zu können.
In naher Zukunft wird das System dann noch flexibler mit den neuen XL-Aufsätzen,
zum einen für größere Minis, mit Magnet dann ohne "aufpappen" und
die Korken zum Stecken für alte und neue Aufsätze.
Ich hab mir jetzt gerade den sechsten gebacken und hoffe das ich mit den
XL-Aufsätzen, dann auch etwas mehr in den "Wechsel"-Modus gehen kann.
Denn das permanente Wechseln der Standard-Aufsätze, eine nette Idee,
bremst mich leider zu sehr aus, bei den Neuen hoffe ich, das ich sie auch
ohne den Halter fürs "Grobe" nutzen kann.
Welche Goldfarben hast du bei den zwei Kriegern verwendet? Die Figuren und der Goldton gefallen mir.
Welche Goldfarben hast du bei den zwei Kriegern verwendet? Die Figuren und der Goldton gefallen mir.
Das war Rich Gold von Pro Acryl.
das 3D Evoli sieht ja richtig klasse aus, wirklich toll! das glaub ich das deine Tochter da glücklich ist Hast du denn inzwischen noch mehr Figuren als 3D erschaffen?
Danke für das Lob! Aber ich habe das nur ausgedruckt und bemalt. Die Vorlage gibt es bei thingiverse. Ich habe noch einen Bobby aus Paper Mario in Arbeit, aber der ist noch nicht fertig bemalt. Selber kreieren könnte ich maximal ein Insert, aber selbst das ist schon eine wahnsinnige Arbeit für mich, wo mir die Zeit für fehlt.
Mein Projekt der letzten Monate ist endlich abgeschlossen: Die Oathsworn Helden-Minis.
Jetzt muss nur noch das Spiel Spaß machen, dann hat sich die Arbeit gelohnt…
Fantastische Arbeit! Hab grad selbst erst alles bemalt (bzw. bin dabei) und kann nur sagen - bemalt macht es nochmal viel mehr Spaß
Hat jemand von Euch Erfahrung mit den AK metallic in der Airbrush (0,2 oder 0,4 nozzle)?
Ich benutze sonst Vallejo, aber das ist aktuell nicht lieferbar
Danke schon mal
Jetzt kann ich zwei große Erfolge vermelden:
1. Das war das letzte Mal, dass ich diese furchtbar redundanten Kultisten bemalen musste und die Erleichterung ist endlos
2. Ich habe jetzt alle sieben Basisfraktionen von Cthulhu Wars bemalt.
Als kleines Zwischenfazit bin ich jetzt bei über 130 bemalten "Miniaturen" für das Spiel.
Jetzt warten noch vier weitere Fraktionen (und die neutrale Azatoth Box) auf Farbe. Die anderen sind auf Deutsch leider schwer bis gar nicht zu erhalten, weshalb ich mich mit der englischen Version eingedeckt und diese selbst eingedeutscht habe.
Aber nun zu den Minis:
Kultisten:
Monster:
Tsathoggua:
Und das Familienfoto:
Darf man eigentlich Farben und Zubehör fürs Miniaturbemalen hier im Marktplatz verkaufen? Ich nutze eigentlich nur noch X-Press Colors und Pro Acryl. Habe aber z.B. noch die Scalecolor Range fast ungenutzt hier rumstehen ….
edit: hat sich geklärt!
Hat hier wer nen besonderen Tipp für Basegestaltung Thema Gras / Weide?
Meine Reiter von Rohan sollen eine schöne Gras Base bekommen, habe ich aber noch nie gemacht. Irgendein tolles Flock zum Drüberstreuen oder ähnliche Tipps?
Schau dir mal die Sachen von Krautcover an.
Die sind ziemlich schön und vor allem schnell gemacht: zb. diesen hier:
Der macht mir echt am meisten Spaß. Täglich versuchen wir uns hier, irgendwelche Dinger noch abstruser, häßlicher und fremdartiger aussehen zu lassen und dann kommt da son handelsüblicher Wirsing vom Acker TOP. Wobei - wenn der in meiner Kindheit auf den Teller kam, war das auch ein Endgegner für mich.
Hier meine Interpretation davon.
Ich hab meinen beiden Charaktere, welche ich in Sheol spiele, einer Farbtherapie unterzogen. Habe versucht, den einzigartigen Lichtlook zu imitieren.
Schöner Look, gerade die Dame finde ich ziemlich cool 👍🏻
Ich hab zwar nichts bemalt, aber heute kamen die HATE Comic Book Extras (Miniaturen).
Mein 2,5 jähriger Sohn schnappt sich eine Miniatur und holt seinen Pinsel.
Fehlt nur noch die Farbe, ich bin sehr stolz. Der Nerdapfel fällt hoffentlich echt nicht weit vom Stamm
Ich habe in unserer Sammelbestellung gerade gefragt. Ist der Comic eigentlich der "normale" Chronicles of Hate? Oder eine Fortsetzung?
Ich glaube, ich hätte die normalen Chronicles gerne mal angesehen.
Jetzt überlege ich, ob die noch in den Handel kommen oder ich beim Game Steward noch zuschlagen sollte.
Ich habe in unserer Sammelbestellung gerade gefragt. Ist der Comic eigentlich der "normale" Chronicles of Hate? Oder eine Fortsetzung?
Ich glaube, ich hätte die normalen Chronicles gerne mal angesehen.
Jetzt überlege ich, ob die noch in den Handel kommen oder ich beim Game Steward noch zuschlagen sollte.
Kann ich die tatsächlich gar nicht sagen, da ich es nur wegen dem Spiel/ Miniaturen geholt habe. Der Graphic Novel geht an meine Frau.
Sag Bescheid falls sie es nicht will. 😁